PARTS required COLLAR CLAMP CLA007 FOOTBALL TOP PANEL PLAYTEC WASHERS FOOTBALL BOTTOM PANEL MEDIUM POST STEEL MESH PANELS REF: T106 - FOOTBALL TARGET PANEL pg 2 of 11...
Foundation Details FINISHED GROUND LEVEL SOIL MEDIUM POST CONCRETE REF: T106 - FOOTBALL TARGET PANEL pg 4 of 11...
Page 5
Attach the 2 x FOOTBALL PANELS to the FRAME Notes: SEE next step to ensure the correct holes are used (some will be left ‘EMPTY’ to bolt to the COLLARS and PLAYTEC WASHERS) REF: T106 - FOOTBALL TARGET PANEL pg 5 of 11...
Page 6
Ensure the panels are bolted as shown below BOLT HOLES CIRCLED GREEN - Using 8 X M10x70mm SOCKET BUTTON BOLTS / 8 X M10 NYLOCS / 8 X END CAPS NYLOC COVERED END SOCKET BUTTON BOLT REF: T106 - FOOTBALL TARGET PANEL pg 6 of 11...
Page 7
PLAYTEC WASHERS (See following pages for details) NOTE: COLLARS ARE TO BE SLID ONTO POLES BEFORE ATTACHING TO BOARD REF: T106 - FOOTBALL TARGET PANEL pg 7 of 11...
Tighten the GRUB screws on the COLLAR CLAMPS There are 3 x GRUB screws per COLLAR CLAMP Notes: Collar clamps are positioned as shown RIGHT (the clamp sits ‘behind ‘ the frame) REF: T106 - FOOTBALL TARGET PANEL pg 8 of 11...
Page 9
Installation Instructions Installation Instructions FURTHER SECURE the PLAYTEC PANELS Using 11 X 5B/N4 TORKTAINERS REF: T106 - FOOTBALL TARGET PANEL pg 9 of 11...
Page 10
Installation Instructions Installation Instructions SCREW SELF DRILLING SCREWS THROUGH PLAYTEC INTO FRAME Screw into the counterbores as circled in PINK below - Using the 14 X self drilling screws provided REF: T106 - FOOTBALL TARGET PANEL pg 10 of 11...
Need help?
Do you have a question about the T106 and is the answer not in the manual?
Questions and answers