Advertisement
TV-KIT-010 Instructions Magnavox HVG Repair - 7621
Last Updated Monday, 29 October 2012 14:51
Soldering
• Hold the soldering iron near the base of the handle.
• Touch the soldering iron onto the area that needs to be soldered.
• Make sure it touches both the item to be soldered and the board. Hold the tip there for a few
seconds .
• Feed a little solder onto the joint at the tip of the iron.
• It should flow smoothly onto the lead volcano shape. Apply the solder to the joint, not the iron.
• Remove the solder, then the iron, while keeping the joint still.
• Allow the joint a few seconds to cool before you move on to the next one.
• Inspect the joint closely.
Reassemble the TV
Reinstall the board in the reverse order that you removed it. Make sure that any plugs, wires,
15 / 17
Advertisement
