Table of Contents
Advertisement
Quick Links
Dr. meter Non-Contact Infrared Thermometer
Safety Information
Please read this user manual carefully before using the thermometer.
Do not clean the thermometer with any solvents.
Safety symbols:
Important notices against hazards
Compliant with European CE safety directive
This thermometer complies with the standards provided below:
EN61326-1
EN60825-1
Warning!
Do not point the thermometer's laser at anyone's eyes, or let the beam strike the eyes from
any reflective surface.
Important Notices
When introducing the thermometer to a new environment, allow the unit 30 minutes to
adjust to temperature changes before usage. Temperature measurement can only resume
when the meter's temperature is consistent with the new environment temperature.
Keep the unit away from EMF (electro-magnetic fields) and induction heaters.
Do not point the unit's laser directly at eyes.
Do not leave the unit on or near objects with high temperatures.
Do not use this unit in areas where explosive gas, steam, dust and smog are present to
ensure uninterrupted measurement results.
Keep the thermometer's lens cone free from frost, oil and dirt to ensure accurate
temperature readings.
Product Illustration
Model: IR-60
User Manual
Advertisement
Table of Contents
Summary of Contents for Dr.Meter IR-60
-
Page 1: Safety Information
Dr. meter Non-Contact Infrared Thermometer Model: IR-60 User Manual Safety Information Please read this user manual carefully before using the thermometer. Do not clean the thermometer with any solvents. Safety symbols: Important notices against hazards Compliant with European CE safety directive... - Page 2 Alarm indicator LCD Display Laser /numeric decrease button Mode button Backlight/numeric increase button Infrared sensor Laser indicator Backlight Trigger button Battery cover Primary display panel: displays measured temperature. Functional indication: displays Max, HAL(high alarm level), LAL(low alarm level), E(emissivity) Secondary display panel Fahrenheit unit Celsius unit Low battery indicator...
- Page 3 Operating the Themometer 1. Set the upper/lower limit values for alarms Hold the trigger and mode button simultaneously to adjust the upper/lower limits set for the alarm. The functional indication display will show the HAL/LAL options, and the secondary display will show the upper/lower limits for the alarm. Press ▲/▼ key to increase or decrease the alarm value.
- Page 4 4. Enable/disable laser Press the button to enable or disable laser. The instrument will display the symbol on the display panel to indicate whether the laser is switched on or off 5. Turn on/off backlight Press the button to turn on or off the display screen’s backlight. 6.
- Page 5 Lens photosensitive The object to cone element be measured Ensure that the object to be measured is placed within the field of view to get an accurate temperature reading. If the object is located outside the field, the thermometer will not be able to detect the object’s temperature. The size of the object is proportionate to the distance required –...
-
Page 6: Battery Replacement
Electro-Polished 0.15 Oxidized 0.5~0.9 Iron Rusted 0.5~0.7 Oxidized 0.6~0.95 Iron(Cast) Non-oxidized Melt & cast 0.2~0.3 Iron(Forged) Passivated Rough Lead Oxidized 0.2~0.6 Mo Oxidized 0.2~0.6 Nickel Oxidized 0.2~0.5 Platinum Black Cold rolled 0.7~0.9 Steel Polished plate 0.4~0.6 Polished plate Zinc Oxidized Asbestos 0.95 Asphalt... -
Page 7: Specifications
Specifications Temperature range -50℃ ~ 550℃ (-58℉ ~ 1022℉) 0℃~550℃ (32℉~1022℉): ±(1.5% reading + 2℃) Accuracy -50℃~0℃(-58℉~32℉): ±3℃ Color LCD 12:1 Spectral response 8-14 um Laser <1mW /630-670nm Level 2 Response time <0.5S Automatic shutdown Operating temperature 0℃ ~40℃ Storage temperature -10℃...
Need help?
Do you have a question about the IR-60 and is the answer not in the manual?
Questions and answers