SERIES:
71531,71532,71533,71541,71542,71543,71544,71545,71551,71552,71553,71554,
71555, 71556, 71557, 71561, 71562, 71563, 71564, 71565, 71573, 71574, 71575, 71576, 71577,
71581, 71582, 71583, 71584, 71585, 71801, 71802, 71803, 71804, 71805, 71806, 71807, 71808,
71809, 71821, 71822, 71823, 71824, 71825, 71831, 71832, 71833, 71835, 71837, 71840, 71841,
71842, 71844, 71846, 71851, 71852, 71853, 71855, 71857, 71861, 71862, 71863, 71864, 71865,
71866, 71868, 71869
1. Introduction
This LED Flood light uses the latest in solid state lighting technology for long life,
low maintenance, and high efficiency.
An excellent alternative to traditional HID lighting. There are multiple installation methods,
suitable for different applications.
An internal power-factor-corrected switch-mode supply allows it to be used on
any nominal 100-277V, 60Hz AC voltage without any variation in light output.
Suitable for use in the following locations:
• Ambient Temp: -20~+40°C
• Wet Locations
2. Installation
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
•Be certain electrical power is OFF before and during installation and maintenance.
•Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Warning:
To avoid explosion:
•Make sure the supply voltage is the same as the rated luminaire voltage.
•Do not install where the marked operating temperatures exceed the ignition temperature of
For supply connections use wire rated for at least 90°C
the hazardous atmosphere.
•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
•Keep lens tightly closed when in operation.
"CAUTION – RISK OF SHOCK'' and "DISCONNECT POWER BEFORE SERVICING"
INSTALLATION INSTRUCTION MANUAL
LED FLOOD LIGHT, 100-277VAC
Rev A Aug 2015
Morris Products
53 Carey Rd Queensbury, NY 12804
Need help?
Do you have a question about the 71531 and is the answer not in the manual?
Questions and answers