Brewing Coffee - Urbino Barista User Manual

Before first use, please check whether all the parts are complete, and make sure there is no damage on the product.
Fill the water into the water tank. Open the handle, and put a Nespresso or Dolce Gusto capsule into the rel
ative capsule holder, then close the handle. Put an empty cup on the drip tray cover, connect the power plug
press the power button, the indicated light turns red when the machine is connected with power, pr
and
ess the big cup button, the indicated light turns blue, then the machine begins to pump water and brew
coffee. The first cup of coffee is not suggested for drinking.
Attention: It's a normal phenomenon that the pumps are exhausting air and pumping water when it started to
brew coffee, or there's water shortage in the water tank.
Operation Instructions

Brewing coffee

1. Fill enough water into the removable water tank, it shall not exceed the maximum water level (maximum 80
0 ml)
2.
Connect the power plug, press the power button to the position "ON", then the indicate light of cups button
turns red and flashing. The machine enter into heating status.
3.
Put a cup on the top of the drip tray , adjust the drip tray cover according to the height of the cup (as shown in pic. 2),
make sure that the cup is in the middle of the drip tray and under the coffee outlet.
4.
Put a Nespresso or Dolce Gusto capsule into the relative capsule holder, and put them into the brewing chamber,
then close the handle. Choose to press big cup ( 80 ml) button or small cup (40 ml) button , the indicate light of
elative small cup or big cup button will turn blue color
same time .
Caution: do not open the handle during brewing, otherwise, it may cause an injury by the hot water
5.
When the indicate light of small and big cup button become red
, the pump begins to pump water and brew coffee at the
第 4 页 共 5 页
, it indicates that brewing is finished