ThermoPro TP8101 Operating Manual
ThermoPro TP8101 Operating Manual

ThermoPro TP8101 Operating Manual

Vacuum sealer system

Advertisement

Quick Links

Vacuum Sealer System
Model No.: TP8101
-18-
1 Operating Manual
1.1 General
Please read the information contained herein so that you can become familiar with your
device quickly and take advantage of the full scope of its functions.
Your vacuum sealer system will serve you for many years if you handle it and care for it
properly.
We wish you a lot of pleasure in using it!
1.2 Information on this manual
These Operating Instructions are a component of the vacuum sealer system (referred to
hereafter as the Device) and provide you with important information for the initial
commissioning, safety, intended use and care of the device.
The Operating Instructions must be available at all times at the device. This Operating
Manual must be read and applied by every person who is instructed to work with the device:
Commissioning
Operation
Troubleshooting and/or
Cleaning
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along
with the device.
1.3 Warning notices
The following warning notices are used in the Operating Manual concerned here.
!
DANGER
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
► Observe the instructions in this warning notice in order to avoid the danger of death or
serious personal injuries.
!
WARNING
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
ATTENTION
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
-17-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP8101 and is the answer not in the manual?

Questions and answers

Summary of Contents for ThermoPro TP8101

  • Page 1 ► Observe the instructions in this warning notice in order to avoid the danger of death or serious personal injuries. WARNING Model No.: TP8101 A warning notice of this level of danger indicates a possible dangerous situation. If the dangerous situation is not avoided, this can lead to serious injuries.
  • Page 2: Intended Use

    2.2 General Safety information PLEASE NOTE Please note A notice of this kind indicates additional information, which will simplify the handling of the machine. Please observe the following general safety notices with regard to the safe handling of the device. 1.4 Limitation of liability ►...
  • Page 3: Food Storage Safety Information

    If the power cable is damaged, it will need to be As a rule, the vakuum sealer system is delivered with the following components: replaced by the manufacturer or his service agency or a similar qualified person, to avoid Vacuum sealer TP8101 any dangers. Vacuum hose ►...
  • Page 4: Design And Function

    4.4 Setup 5 Design and Function 4.4.1 Setup location requirements: This chapter provides you with important safety notices on the design and function of the device. In order to ensure the safe and trouble-free operation of the device, the setup location must 5.1 Complete overview fulfil the following prerequisites: The device must be set up on a firm, flat and horizontal surface with sufficient load-bearing...
  • Page 5: Operation And Handing

    4. Press the “VACUUM ONLY”-button and the corresponding LED control light starts flashing. 6 Operation and Handing 5. When the LED light stops flashing, the bag is sealed. This chapter provides you with important notices with regard to operating the device. Observe 6.
  • Page 6: Cleaning And Maintenance

    ► Do not leave too much air inside the bag. Press the bag to allow extra air to escape from Please note the bag before vacuuming it. Too much air inside the bag increases the vacuum pump ► For the correct storage, please slightly close the cover, do not lock, it will deform the loading and may cause that the motor works insufficient to draw away all the air out of the bag.
  • Page 7: Troubleshooting

     Preservationags The bag is not being The welding bar is Select another bag; wrap paper Washing the bagging material in warm water with a mild dishwashing soap, then rinse the bags well and allow drying thoroughly before reusing. welded correctly overheating so that the serviettes around any sharp bag melts...
  • Page 8: 12 Technical Data

    11 Customer Service Telephone: 44-203-769-1321 Email: service@myitronics.com Hours: Weekdays 8:00 AM- 6:00 PM EST 12 Technical Data Vacuum sealer system Device TP8101 Model 230V~ 50 Hz Mains data 100 W Power consumption 380 x 140 x 65 mm External measurements (W x H x D): 1.3 kg...

Table of Contents