DW Windsor Series Installation Instructions

Installation Instructions

IMPORTANT

• DISCONNECT ELECTRICAL SUPPLY BEFORE INSTALLATION OR SERVICING.
• THIS PRODUCT MUST BE EARTHED.
• THIS PRODUCT IS DESIGNED TO OPERATE OUTDOORS. IF REQUIRED TO BE
USED INDOORS PLEASE CONSULT DW WINDSOR.

Product Details

The Windsor range is supplied with lantern and "spigot fixing" separated.
Fig. 1
Fig. 1 - Windsor lantern
Dimensions (mm)
A B C
Street 833 440 76
Avenue 745 390 76
*Maximum weight of lantern including spigot fixing

Tools Required

Tools not supplied.
1 5mm Allen Key 2
Fig. 2 - Tools required for Windsor / Lancaster installation. Not supplied.

Recommended Torque

Base Nut Torque (Nm)
Street 30
Avenue 30
Note!
• Luminaire to be positioned so that prolonged staring into the
luminaire at short distances is not expected.
• Do not stare at operating light source.
• Personnel to wear Protective Safety Glasses compliant with EN166 1F/ EN169 - 5
when commissioning or maintaining this luminaire.
Max. Weight (kg)* Windage m²
ØC D
76 188 10.3
76 119 8.3
Pozi or Slotted
10mm Spanner 3
Screwdriver
Column Mounting Torque (Nm)
16
16
IP65 IK08

Base Attachment

Unpack the lantern and frog and fix them together as shown below.
Step 1
Unpack lantern and base. Pass cable through centre of base. Locate base on
studs. Tighten nuts onto studs to the correct torque. Refit black balls finger
tight. Wire cable into terminal block:
Important Wiring Code
L = Live, N = Neutral, E = Earth
This lantern must be earthed.
0.28
0.22
Tools required:
2 10mm Spanner
Pozi or Slotted
3
Screwdriver
Fig. 3 - Attaching frog base.
Fig. 2
Tools required:
2 10mm Spanner
Pozi or Slotted
3
Screwdriver
Fig. 4 - Attaching cast base.
Due to continuous product development the details within this document
are subject to change at any time, please contact us for the most up-to-date
information or visit: www.dwwindsor.com
DW Windsor
Pindar Road, Hoddesdon, Hertfordshire, EN11 ODX
T: +44 (0) 1992 474600 | E: info@dwwindsor.com
dwwindsor.com
Sheet 1 of 2
The Windsor Range
Traditional Lanterns
Street and Avenue sizes
230VAC 50Hz
Fig. 3
Fig. 4
Issue 03 - February 2018