Avago LSI SAS 9211-4i User Manual

Pci express to 6gb/s serial attached scsi (sas) host bus adapter

Advertisement

LSI® SAS 9211-4i PCI Express® to
6Gb/s Serial Attached SCSI (SAS)
Host Bus Adapter
User Guide
Version 1.1
October 2014
DB15-000852-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LSI SAS 9211-4i and is the answer not in the manual?

Questions and answers

Summary of Contents for Avago LSI SAS 9211-4i

  • Page 1 LSI® SAS 9211-4i PCI Express® to 6Gb/s Serial Attached SCSI (SAS) Host Bus Adapter User Guide Version 1.1 October 2014 DB15-000852-01...
  • Page 2 800-372-2447 Avago Technologies, the A logo, LSI, Storage by LSI, and Fusion-MPT are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright © 2011–2014 Avago Technologies. All Rights Reserved.
  • Page 3: Table Of Contents

    LSI SAS 9211-4i PCI Express to 6Gb/s SAS HBA User Guide Table of Contents October 2014 Table of Contents 1 Overview ..........................4 2 HBA Features .
  • Page 4: Overview

    LSI SAS 9211-4i HBA, provides high-performance internal storage connectivity for servers and workstations. The LSI SAS 9211-4i HBA provides four lanes of 6Gb/s SAS connectivity and is matched with four lanes of PCIe 2.0 5Gb/s performance. The low-profile design of the SAS HBA includes a full-height bracket and low-profile mounting bracket that creates a universal fit for any server.
  • Page 5: Sata And Sas

    For Solaris support, contact the LSI Technical Support team. LSI SAS 9211-4i HBA Characteristics Flash The LSI SAS 9211-4i HBA has onboard Flash ROM for the firmware and BIOS. The LSI SAS 9211-4i HBA provides one 4-M x 8-bit Flash ROM for storing the firmware and BIOS. Connectors This section describes the different connectors on the LSI SAS 9211-4i HBA.
  • Page 6: Physical Characteristics

    Physical Characteristics The LSI SAS 9211-4i HBA is a 6.6-in. x 2.713-in., low-profile board. The component height on the top and bottom of the LSI SAS 9211-4i HBA is in accordance with the PCIe specification. The following figure shows the board connectors.
  • Page 7: Electrical And Environmental Specifications

    Safety Characteristics All LSI SAS 9211-4i HBAs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe bus slot, all voltages are below the SELV 42.4-V limit.
  • Page 8 Replace the mounting bracket (system dependent). If required for your system, replace the full-length mounting bracket that ships on the LSI SAS 9211-4i HBA with the shorter bracket supplied. Save and reuse the two screws that attach the long bracket to attach the short bracket.
  • Page 9: Revision History

    LSI SAS 9211-4i PCI Express to 6Gb/s SAS HBA User Guide Revision History October 2014 Revision History Version 1.1, October 2014 Made the following changes: Updated Operating System Support URL.  Converted the book to the new template.  Version 1.0, August 2011 Initial release of the document.
  • Page 11 McGrp.Ru Сайт техники и электроники Наш сайт McGrp.Ru при этом не является просто хранилищем инструкций по эксплуатации, это живое сообщество людей. Они общаются на форуме, задают вопросы о способах и особенностях использования техники. На все вопросы очень быстро находятся ответы от таких же посетителей сайта, экспертов...

Table of Contents