Page 2
请在此下载其他语言的用户指南: www.podspeakers.com Best regards from, Your Podspeakers Team Model: MicroPod Bluetooth MK II – User Guide revision v1.0 – Sept 2017 We accept no liability for printing errors. Specifications are subject to change without notice. PODSPEAKERS 2017 EET Group A/S, Tempovej 41, DK2750 Ballerup, Denmark...
POWER HOW DO YOU WANT TO USE YOUR SPEAKER? STAND ALONE SETUP WIRELESS STEREO SETUP CONNECTIONS 1 x MicroPod Bluetooth Wireless Hi-Fi speaker BUTTONS 3 x Spikes 3 x Rubber feet RUNNING-IN PERIOD 1 x AC/DC power supply with 1 x EU / 1 x UK / 1 x US / CN plug...
Setup your MicroPod Bluetooth MicroPod Bluetooth. as a single speaker NOTE: If your MicroPod BT has not played back audio for 20 minutes, it will automatically go to Standby mode (This is according to EU regulations). Power consumption in Want to play using…...
Bluetooth input and output Pair the two MicroPod Bluetooth speakers to play wireless stereo as described in “Stereo Pairing” page 14 under “Buttons”. NOTE: You must pair a device (e.g. smartphone) to a speaker before doing a stereo pairing between two speakers.
CONNECTIONS CONNECTIONS Description of MicroPod Description of MicroPod Bluetooth input and output Bluetooth input and output DC IN: Connect the included power supply, using a suitable plug for your country. USB PORT: For charging of external devices like mobile phones etc. Output 5V/1A.
Bluetooth devices on your phone, PC etc. Then simply choose MicroPod on the list, to establish the connection. NOTE: A speaker can hold up to 8 pairings (devices being paired), but only one device can be connected. 2 devices can not be connected at the same time.
Bluetooth buttons STEREO PAIRING Blue: Speaker is in Bluetooth Mode Your MicroPod Bluetooth supports wireless stereo by using two MicroPod • LED is Solid: Speaker is ON and playback ongoing Bluetooth speakers. You get full wireless stereo freedom by pairing two •...
We strongly advise against the use of any solvents or cleaners on the lacquered BUILT-IN BATTERY MicroPod cabinets. The cabinet surface usually only requires dusting or cleaning with a damp soft cloth (only use cold clean water). Avoid touching the drive units, especially the tweeter, as damage may result.
MicroPod Bluetooth • Do not use MicroPod in wet, misty or dusty conditions. This might damage This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: 1. This device may not cause harmful interference, and MicroPod and void warranty 2.
FOR YOUR SAFETY The next few pages contains FCC and Canada For your safety and protection compliance information for MicroPod Bluetooth of your MicroPod Bluetooth 重要安全指示: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: Battery operation time will degrade over time 应在任何时候都能接触和操作。 Speaker dimensions WxHxD: 125 x 160 x 114 mm 17、 点燃的蜡烛等明火不应该放在设备上。 警告:为减少火灾或触电危险,请勿让本设备淋雨或受潮 THANK YOU! 等边三角形内带箭头符号的闪电图案旨在提醒用户产品外壳 中存在非绝缘的“危险电压”,可能足以构成对人员的触电 危险。 Once again - Thank you for purchasing a MicroPod Bluetooth speaker. 等边三角形内的感叹号旨在提醒用户随机文档中存在重要的 Best regards from, Your Podspeakers Team 操作和维护(维修)指示。...
Need help?
Do you have a question about the MicroPod and is the answer not in the manual?
Questions and answers