Additional Options In The Context Menu - Hama Save2Data SecureKey Operating Instructions Manual

• Before saving the file you may create a new
folder (only on the Save2Data SecureKey, not
on the terminal device).
• To do this, choose the option Create folder in
the bottom-left corner of the display and enter a
name for the folder.
• After selecting the desired target folder, save
the file(s) by selecting the Paste option in the
bottom-right corner of the display.
• Then the transfer window opens to show the
progress of the transfer.
• Successfully transferred data are listed under the
Transfer Completed tab.
• If the transfer is interrupted, the files affected are
listed under the Transfer Failed tab.
•
You are returned to the folder in which you
selected the pictures to be transferred.
•
Deletes the current data transfer display. The
transferred pictures, however, are retained.
Note – Transferring data
Since the procedure for transferring videos etc.
is identical, the corresponding sections of these
instructions refer to this section.
Note – Transferring from and to the
same storage device
It is possible to transfer files from and to the
same storage device (for example, pictures and
videos from the Save2Data SecureKey into
a sub-folder).

9.1.3 Additional options in the context menu

• Photos
• By default, the pictures saved on the Save2Data
SecureKey are displayed.
• Choose whether the pictures from
Save2Data SecureKey or
device should be shown.
• Select in the top-right corner of
the display
•
Use the circle on the left-hand side to select the
picture(s) that you wish to transfer. Successful
selection is confirmed by this symbol:
• To select all pictures at once, tap Select all at
the top-left corner of the display.
• Aside from the options to copy and move, the
context menu at the bottom edge of the display
also provides other options.
• Delete: Deletes the selected file(s) from the
storage location.
• Share: Opens the context menu of the
terminal device.
the
your terminal
13