Silvercrest SWKD 2400 A1 Operating And Safety Instructions Manual page 15


Fill the pot (3) with drinking water up to a minimum of '0.5 l MIN' and a maximum of '1.7 l
MAX' on the water level gauge (4) and close the lid (13) by pressing it down until it snaps into
place.
You can freely rotate the pot (3) around its vertical axis when you place it on
the base (5). The pot does not need to be locked into a particular position. This
way, you can turn the pot (3) so that the water level gauge (4) easy to see or
to direct the steam away from you.

Plug the connector into a power socket, which is always easily accessible.

Place the pot (3) onto the base (5).

Press the on/off button
display (12), indicating the target temperature of 100°C, and the heating process begins. You
can adjust the target temperature in increments of 5°C between 40°C and 100°C by pressing
the (11) or
on/off button (9).

Otherwise, you can also proceed as follows: Select the desired target temperature by pressing
the (11) or
heating process.

The kettle is illuminated and the selected target temperature flashes on the display when the
water is being heated. Furthermore, the kettle makes a noise. The noise is not due to a
malfunction.
DANGER of burn injuries
Turn the pot (3) so that the steam is directed away from you. Otherwise you
could burn yourself.
Only boil the water with the lid (13) closed. Otherwise the pot (3) can tip over
and cause burn injuries and damage to property.

As soon as the water reaches the selected target temperature, this continuously flashes in the
display (12).
If the keep-warm function is not activated, the display (12) automatically switches off after approx.
three minutes.
The keep-warm function allows you to keep heated water at a certain temperature for a longer
period of time. As soon as the water temperature in the pot (3) drops by a certain level below the
selected target temperature, the pot automatically begins heating again to the selected
temperature. The keep-warm function only works for a temperature range of 40°C to 90°C.
(9) in order to switch on the pot (3). The number 100 flashes in the
(10) buttons. You can stop the heating process at all times by pressing the
(10) buttons and then press the on/off button
SilverCrest SWKD 2400 A1
(9) in order to start the
English - 13