Summary of Contents for MAKSIWA TC.3000
- Page 1 TC.3000 Panel Carrier INSTRUCTION MANUAL Attention: Read the instruction manual before using the appliance.
- Page 2 • It is recommended wearing shoes with non-slip soles. Specifications Use protection for the hair in order to hold them. The TC.3000 Panel Carrier was made to facilitate • Always wear safety glasses. Also use hearing the day-to-day tasks of the modern woodworker.
- Page 3 easily carry up to 2 full sheets of wood at once. It H - Left bar panel support; has an adjustable height mechanism making it easy to I - Right bar panel support; work in conjunction with virtually any woodworking equipment you have, such as panel and table saws.
- Page 4 First, assemble the kit 1: 1) Mount the panel carrier base with the drive wheels. Take the structures and align them at the vertices of the base. After that, place the drive wheels and screw them. Kit 2: - Support panel - Support height regulation - Structure upper reinforcement - Structure cross reinforcement...
- Page 5 Ready! Kit 1 is properly mounted. 2) Mount the structure upper reinforcement. Detail Now, assemble the pieces of Kit 2: 3) Mount the side structure crossbar assembly. 1) Mount the structure cross reinforcement. Detail Detail...
- Page 6 4) Mount the support panel. Finally, assemble Kit 3: 1) Mount the left and right bar panel support. Detail Detail Ready! Kit 2 is properly assembled. 2) Mount the structure cross reinforcement. Detail...
- Page 7 3) Mount the support panel section set. Kit 3 is assembled. 4) Install all pulleys. Ready! The TC.3000 Panel Carrier is subject to assembly. Before using, remember all safety and installation regulations. Detail...
-
Page 8: Warranty Terms
4. In case an exchange of machine is needed, please return the defective part or machine to MAKSIWA. 5. All workplace adaptations for the equipment are under the responsibility of the machine owner.