Sony KP 43T90 Operating Instructions Manual page 28

Using Your New Projection TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
CH
JUMP
-
0 9
or or
and ENTER
(white labeled button)
ANT Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol "b" (or "B") is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
AUDIO
symbol " " will appear for a few seconds to indicate which picture's sound is being
received.
This is useful when you need to copy down information of the main picture.
FREEZE Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
window picture size is automatically changed to 1/9 if it was 1/16.
Press again to resume normal PIP viewing.
Press to switch the audio and video of the main picture and the window picture.
SWAP
Each time you press SWAP, the picture and sound of the two will be exchanged.
24
Press to select the TV channel on which the symbol "b" is
displayed. (for details, see "Watching the TV" on page 20)
Speed Surf
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Note:
• If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "Channel Skip/
Add" on page 31)
REFER TO THE