Sony KDF-46E3000 Operating Instructions Manual page 22

qs
qd
qf
qg
qh
qj
22
Button Description
qs BD/DVD/ When FUNCTION is switched on BD (Blu-ray Disc), DVD
STB or STB, these buttons operate the video equipment you have
Operating
programmed into the remote control. For details, see "Using
qk
Buttons Other Equipment with Your Remote Control" on page 27.
. PREV: Press to replay the current program from the
ql
previous Chapter Mark (if any) or from the beginning of the
live TV cache.
period of time.
time when playing back a recorded program.
> NEXT: Press to advance forward to the next Chapter
Mark (if any) or to live TV when playing back a recorded
program.
w;
m (fast reverse): Press to play a program in fast rewind
wa
mode.
H PLAY: Press to play a program at a normal speed.
M (fast forward): Press to play a program in fast forward
mode.
X PAUSE: Press to pause playback.
x STOP: Press to stop the playback of a recorded program.
qd THEATER Press to turn on and off the Theater Mode. The picture
settings will be set for a cinema-like experience* and the
audio will be switched to the audio output of the attached
speakers of your BRAVIA Theatre Sync audio system. Your
BRAVIA Theatre Sync audio system must be connected by
an HDMI connection to your TV (see page 17 for details).
qf VOL +/–
Press to adjust the volume.
qg MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
qh DVD/VCR z REC: Press to record. Pressing this button alone starts the
Record recording process.
Buttons X REC PAUSE: Press to pause the recording.
x REC STOP: Press to stop the recording.
qj BD/DVD
Press to display the top menu or menu of the connected
TOP MENU/ equipment.
MENU ~
• For more information, refer to the operating manual of the
qk POWER
Press to turn on/off the external equipment selected from the
FUNCTION buttons 3.
ql TV Press to turn on and off the TV.
POWER
w; JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
wa PICTURE
Press repeatedly to cycle through the available picture
modes: Vivid, Standard, Cinema. The picture modes can
also be accessed in the Picture settings. For details, see
Picture settings on page 32.
* Effectiveness will depend on the source.
REPLAY: Press to replay the current program for a set
ADVANCE: Press to advance forward a set period of
connected equipment.
JUMP JUMP