Summary of Contents for kapitaler Hirsch BUOY.3000
- Page 1 Instruction manual LED hanging lamp with exchangeable Osram LED warm white (2700 K), 230 lumen, 2.6 W Product code: 2211525/2018/R/S...
-
Page 2: Table Of Contents
Detection of errors – remedy ................13 Each BUOY.3000 is absolutely one of a kind due to its signs of wear and tear. As a real upcycling product it has dents, scratches and sometimes slight flash rust. -
Page 3: Warranty
Safety instructions Our BUOY.3000 LED hanging lamps are subject to continuous quality control The LED hanging lamp BUOY.3000 is only intended for use in dry interiors (not suit- throughout the whole manufacturing process. In case the hanging lamp should not able for moist rooms) and may only be used corresponding to its construction. -
Page 4: Instructions Before Use
The scope of delivery covers the complete LED hanging lamp BUOY.3000, this in- The hanging lamp may not be disposed of with other household waste struction manual, a package copy of the mounted LED illuminant as well as a return at the end of its lifetime (see “Disposal instructions“... -
Page 5: Technical Data
Technical data III. Slide the ceiling rose back along the lamp cable until the suspension is exposed. Voltage: 220-240 V, ~50/60 Hz IV. Guide the upper oval hole of the suspension over the hook. Protection class: I, protective earth conductor installed LED base: GU10 LED illuminant:... -
Page 6: Adjusting The Height
V. Make sure that the electrical connection is carried out by an electrician. Adjusting the height The height of the LED hanging lamp BUOY.3000 may be adjusted by the length of the cable by means of the suspension 4b. I. Lead both cable ends... -
Page 7: Cleaning And Care
Cleaning and care until the correct length is reached. Cleaning and care of the hanging lamp BUOY.3000 is limited to its surface. Abso- IV. Now pull the upper part of the lamp cable back again through the central lutely no moisture may enter the lamp shade or conducting parts. -
Page 8: Replacement Of Led Illuminant- A: Access To Led Illuminant
III. Carefully pull the lid with the illuminant and the centring ring In order to be used for a long time, the hanging lamp BUOY.3000 is constructed of the lamp shade until you see the lamp carrier – the illuminant unit is so that the LED illuminant may easily be replaced at the end of its lifetime. -
Page 9: Replacement Of Led Illuminant - B: Removal Of Led Illuminant
Replacement of LED illuminant – B: Removal of LED illuminant Before removal of the LED illuminant, make sure that the hanging lamp is approx. ¼ rotation. disconnected from the electrical circuit by switching off the upstream fuse/the residual current circuit breaker. II. -
Page 10: Replacement Of Led Illuminant - C: Installation Of Led Illuminant
Replacement of LED illuminant – C: Installation of LED illuminant Before installing the LED illuminant, make sure that the hanging lamp is discon- III. Push the centring ring over the illuminant tightly and centrally into the lid nected from the electrical circuit by switching off the upstream fuse/the residual so that both parts rest at the bottom of the lid current circuit breaker. - Page 11 LED hanging lamp BUOY.3000 Product code 2211525/2018/R/S Please do not hesitate to contact us if you have questions regarding our product or in case of problems, notices or re-orders. Our contact hours are Monday to Friday from 9:00 a.m. to 6:00 p.m.
Need help?
Do you have a question about the BUOY.3000 and is the answer not in the manual?
Questions and answers