CONGRADULATIONS AND THANK YOU
Congratulations, you are not going to regret the purchase of you new Madison tube amplifier. Although
simple looking, much time and thought has gone into the design of these amplifiers. They are packed with many
features that you may not know about.
Many amplifiers have little switches and extra knobs to control tonal features and little bell and whistle sound
effects. You will notice the Divinity does not have much of this. Why? Because, we spent so much time on the
tone and attack of these amplifiers, that they did not need it. Besides, why make it confusing.
With the Divinity, your best tone is in your standard 3 band EQ control. There is no need for a contour or
presence control. There is no option of tightness effects sounds. If you want an amp that sounds muddy, buy a
muddy amp. If you want tight, defined attack, you have purchased the right amp.
Thank you again for supporting our small company and being a part of the Madison family.
Enjoy your amplifier and good luck in all your musical endeavors.
SPECIFICATIONS
Power Rating
Divinity Head - 100 watt tube amplifier
Divinity 12 - 60 watt tube amplifier
Preamp Tubes
Two 12AX7 and two 12AT7
Power Tubes
Divinity Head - Four EL34 power tubes
Divinity 12 - Two EL34 power tubes
Dimensions: 27.5" x 10.5" x 10"
Weight: 55 LBS
MSRP: $1299
Divinity Head and Divinity 12
All specifications are subject to change without notice
FEATURES
Twin channel high gain operation
2/3 channel operation with clean CH Boost
Effects loop
Spring reverb Heavy Tolex covering
4/8/16 ohm speaker outputs
4 pin foot switch with 20 foot cables included
Metal hardware
Packed in quality rubberized foam
CE certification
Need help?
Do you have a question about the Divinity 12 and is the answer not in the manual?
Questions and answers