1. Manuals
  2. Brands
  3. AK-NORD Manuals
  4. Cables and connectors
  5. SER2USB
  6. Installation instructions

AK-NORD SER2USB Installation Instructions

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

SER2USB
Cable
Installation instructions
Thank you very much for your decision to purchase an
AK-NORD product!
Our quick start guide includes an overview of Getting Started when using the
SER2USB cable. It shows how simple and easy you can integrate the product
into your infrastructure.
However, if you need help when commissioning the AK-NORD products or if
you have any questions regarding individual settings, we will be at your
disposal at any time. Please call us or send us an E-Mail.
+49 (0) 4821 / 804035-0
service@ak-nord.de
We will be glad to help you in particular.

Requirements:

Please install our tool
XT-ADMIN.
You will either find the information either on
the CD-ROM included in the delivery or you may download it from our
homepage www.ak-nord.de.
In addition, we recommend you to thoroughly read the corresponding manual
beforehand. Please follow all recommendations, remarks and warning notes in
order to guarantee that the system is working properly.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SER2USB and is the answer not in the manual?

Questions and answers

Summary of Contents for AK-NORD SER2USB

  • Page 1 AK-NORD product! Our quick start guide includes an overview of Getting Started when using the SER2USB cable. It shows how simple and easy you can integrate the product into your infrastructure. However, if you need help when commissioning the AK-NORD products or if you have any questions regarding individual settings, we will be at your disposal at any time.
  • Page 2 SER2USB Cable Automatic configuration In the delivery status the SER2USB cable is delivered with an automatic baud rate recognition. I.e. for the first print job, the SER2USB cable tries to automatically determine the correct serial settings. The following procedure is recommended: 1.) Connect the SER2USB cable to the printer (USB).
  • Page 3 PC / Laptop with a serial interface. Please install our tool XT-ADMIN-XXL. You will either find it on our homepage www.ak-nord.de or on the CD-ROM included in our delivery. Connect the SER2USB cable to the PC / laptop (COM). Start “XT-ADMIN-XXL” ,select “XT-Serial” ,configure the serial...
  • Page 4 SER2USB Cable Manual configuration (continued) Then insert the power supply unit of the SER2USB cable, select the large input field with the mouse and start within the next 3 seconds to press the keys “ESC” “ESC” “A” “K” (without +) . Between each input, take another 3 seconds.

Table of Contents