Alemlube DK80 Owner Technical Manual

Diesel & Water Transfer Engine Pump Key Start
Description
The Alemlube DK80 diesel driven 3" transfer engine pump is specifically designed and manufactured for the transfer of diesel
and water. Mounted in a robust tubular steel roll frame with rubber feet the DK80 is completely portable, suits many industrial,
workshop,agricultural, municipal, marine services and on site applications including construction site dewatering and is capable
of transferring up to 900 litres of diesel fuel or water per minute.
Driven by a powerful diesel engine this lightweight die-cast aluminium pump with 3" diameter inlet & outlet ports operates efficiently
with a maximum suction head of 7 metres and a maximum lift head of 26 metres.
Always ready to perform tank filling, diesel or water transfer the DK80 has a 3.5L fuel tank capacity with a key start starting system.
Specifications
Uses
Engine Type
Maximum Flow Rate
IMPORTANT
Please make certain that persons who are to use this equipment thoroughly read and understand
these instructions and any additional instructions provided prior to operation.
NOTE
No refund or exchange once petrol is placed into the fuel tank.
Warranty registration must be complete within
30 days of purchase with proof of purchase.
NSW/ACT QLD/PNG
TEL: (02) 9677 1555 TEL: (07) 3204 9166
FAX: (02) 9675 1155 FAX: (07) 3204 1224
OWNER'S TECHNICAL MANUAL
Diesel Driven 3"
Diesel and water transfer
OHV 4 stroke, Air Cooled
900 L/min
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at www.alemlube.com.au
WA SA/NT
TEL: (08) 9302 4199 TEL: (08) 8241 7111
FAX: (08) 9303 2095 FAX: (08) 8241 7011
or www.alemlube.co.nz
DK80
NZ
TEL: (64) 9 447 1007
FAX: (64) 9 447 1008
1 of 16