Advertisement
Advertisement
Table of Contents
Related Manuals for LINK-MI LM-WIH1
Summary of Contents for LINK-MI LM-WIH1
- Page 1 LINK-MI LM-WIH1 HDMI Adapter Operation manual...
- Page 2 Introduction LM-WIH1, a converter for the Wii console, outputs video and audio in full digital HDMI format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your TV/monitor.
- Page 3 LM-WIH1 into the AV Multi Out Connector in the back of the Wii console. 2. Plug one end of the HDMI cable into the LM-WIH1 HDMI output, and plug the other end to the HDMI input on the TV/monitor.
- Page 4 3.5mm plug to the 2RCA audio cable. 1. Make sure that the Wii console is powered off. Then insert the AV Multi Out Plug of the LM-WIH1 into the AV Multi Out Connector in the back of the Wii console.
- Page 5 2. Plug the HDMI end of the HDMI-to-DVI cable into the LM-WIH1 HDMI output, and the DVI end to the DVI input on the TV/monitor. 3. Connect the 3.5mm plug end of the audio cable to the 3.5mm stereo audio jack on the LM-WIH1, and connect the other end of the audio cable to the RCA connectors on the TV/monitor or stereo equipment.
- Page 6 HDMI signals output from the LM-WIH1 can provide you with superior display quality without transmission loss! Q: I already set the Wii video output to 480p mode, but why does the LM-WIH1 still output video in 480i mode? A: The output mode depends on several factors: 1) theWii console, 2) LM-WIH1, 3) theTV/monitor, and 4) the gaming software.
Need help?
Do you have a question about the LM-WIH1 and is the answer not in the manual?
Questions and answers