1. Application This fresh air intake kit is designed to be installed on a wood stove with legs. The vent termination must be installed outside the building. 2. Kit Contents Black metal screw #10 x ⅝" Air Intake Housing 5" Self-adhesive gasket (D) 1x (E) 36"...
5. Installation Instructions The following images are showing a generic wood stove model. Even if your stove is different, the installation steps are identical. Step 1. Remove and keep the screws (A, 4x) that holds the air control cover in place. A 4x Step 2.
Page 5
Step 3. Cut to length and install two strips of self-adhesive gasket (E) on the fresh air intake (D) as shown.
Page 6
Step 4. Position the air intake underneath the stove and fix it at the back with two screws (F, 2x). F 2x...
Page 7
Step 5. Fix the air intake on the front of the stove with two screws (F, 2x). F 2x...
Page 8
Step 6. Reinstall the ash drawer (C) and the air control cover (B). Step 7. Fix the air control cover (B) on the stove using screws (A, 4x) kept from Step 1. A 4x...
Page 9
Step 8. Make a 6" x 6" (150 mm x 150 mm) opening in the outside wall behind the unit. Install a 5" insulated flexible duct (G) to the air intake adapter using a clamp (H). Attach the other end of the flexible duct to the air intake grille (J) with another clamp (H).
Page 10
For a mobile home installation, use the leg retainers (L, 4x) to secure the stove to the floor. Use the appropriate hardware (M, 4x) for the flooring.
Page 12
SBI HEATING ACCESSORIES 255 De Copenhague Street Saint-Augustin-de-Desmaures Québec, Canada G3A 2H3 418-908-8002...