Advertisement
Quick Links
PART NO. Z1-006-910, IB033561
Jul. 2018
Instruction manual
SC01-PFX
Interface Cable
The SC01-PFX is a dedicated cable for use in connecting a Kikusui PFX2500 Series Charge / Discharge System Controller to a
Kikusui PAT-T Series Regulated DC power supply. Because the cables that are necessary for making this connection are already
assembled, you can connect the system controller and the DUT easily and in a short amount of time.Before you use the product,
thoroughly read the "
Safety Symbols" and "
System Controller operation manual.
When shipped from the factory, a protective socket is attached to the J1 connector of the PAT-T series. Store this socket so that
you can reuse it when the cable is removed.
Example of Connecting a PFX2512 to the PAT40-200T
Ferrite core
DC POWER SUPPLY connector
Checking the Package Contents
SC01-PFX [With core] (1 pc.)
Length: Approx. 1 m
How to Use
Check that the POWER switch is turned off. Insert it securely using the lock lever and hook. Check that it does not fall out.
When removing a cable from a device, remove it while holding the connector's lock lever or hook without
CAUTION
pulling on the cable.
Lock lever
KIKUSUI ELECTRONICS CORP.
1-1-3 Higashiyamata, Tsuzuki-ku, Yokohama,
224-0023, Japan
Tel: +81-45-482-6353
Safety Precautions" that are written in the PFX2500 Series Charge / Discharge
PFX2512
Operation manual
( This manual, 1 coopy)
for
To DC POWER SUPPLY
PFX2500 series
Attach the
lock lever
The newest version of the operation manual can be downloaded
Fax: +81-45-482-6261
from Download service of Kikusui website.
J1 connector
+
Check that all parts are included and that they are not
damaged. If any of the parts are damaged or missing, contact
your Kikusui agent or distributor.
Website
http://www.kikusui.co.jp/en
PAT40-200T
–
To
J1 Connector
Hook
for
PAT-T
© 2018
Advertisement
