●Thank you for your purchase. Please read the instruction book carefully before using this product, and please use the machine according to the instruction book. Please properly retained for reference because the continuous improvement of products is subject to change without notice. ●The picture diagram only and could be similar to the product.
Accessory Description Product Part Name Remark: The actual product may a little different to the illustration. Name Quantity Name Quantity Pusher Cleaning Brush Juice Cap Instructions Juice Strainer Pusher Turnover Cap Prouduct Specifications Plate Hopper Model Rated Voltage 120V~ Rated Power Rated Frequency 250W 60Hz...
The continuous time to use this product should be controlled within 20 minutes. Instructions This product is strictly prohibited from running without load or overload. When the product is working, do not move it or touch any moving parts in case of accidental injuries.
Page 5
6.Install the plate hopper. 4.Connect the auger to the fine strainer. Assembling Method When installing the plate hopper, the With the small head of fine strainer unlocking label and “▲”on it should be upwards, insert the auger and turn kept in line. clockwise until you hear sound of 1.Before installing the juice cup assembly, please ensure that the sealing ring of Then rotate it to make sure that the...
Assembling Method Method of Usage 8.How to use the Material Inlet: 1.Turn on the switch (Forward) Put the fruit of suitable size in the Material Inlet, and then turn the turnover cap, Forward: push down fruits and vegetables for juicing. the fruit will fall into the Squeezing Tank, as shown in Figure ①...
3. If the machine shutdowns suddenly when it is running, press the “OFF” button first and then press the “REVERSE” button. To make the food in the squeezing screw can up release and then press the “FORWARD” button (Repeated 3 times). When the machine is in reverse, gently press the lid with your hand(to prevent the lid loose).
Page 8
2. Do not make the mainframe put into water for cleaning and be sure to use wrung soft cloth to clean it. 3. After cleaning, please dry the cleaned parts and store them in a clean and ventilating place. Attention: ①...
Need help?
Do you have a question about the A10 and is the answer not in the manual?
Questions and answers