Advertisement
OPERATION & MAINTENANCE MANUAL
Copyright 2012 by General Machine Products (KT), LLC
All rights reserved. No part of this publication may be copied,
reproduced or transmitted in any form whatsoever without the
written permission of
www.gmptools.com
JAMB SKID
P/N
70640
70643
70646
General Machine Products (KT), LLC
GMP • 3111 Old Lincoln Hwy • Trevose, PA 19053 • USA
TEL: +1-215-357-5500 • www.gmptools.com
Page 1 of 4
RANGE
48" to 85"
84" to 121"
114" to 151"
July 13 2017 USA Ver 1a
General Machine Products (KT), LLC
Manual P/N 34654
Advertisement
Table of Contents
Summary of Contents for GMP JAMB SKID
- Page 1 General Machine Products (KT), LLC written permission of GMP • 3111 Old Lincoln Hwy • Trevose, PA 19053 • USA TEL: +1-215-357-5500 • www.gmptools.com July 13 2017 USA Ver 1a Page 1 of 4 www.gmptools.com...
- Page 2 (B). REMOVAL 1. Place leverage bar under locking foot pedal and pry up to release the Jamb Skid. 2. Remove the Jamb Skid by reversing the installation pro- cedure. unlocked fully engaged and locked This equipment should be used only by personnel who have been given the appropriate training and who are competent to use it.
- Page 3 70640 & 70643 rated @ 10,000 lbs. 70646 rated @ 5,000 lbs. Maintenance 1. Before use, ensure that the Jam Skid is not damaged, bent or twisted and all bolts are tight 2. Locking pins should be wiped with a light oil to prevent rust. 3.
- Page 4 OPTIONS Quadrant Blocks Max. Cable Size Weight 84453 3 in. (76 mm) 60 lbs (27 kgs) 84454 4 in. (102 mm) 75 lbs (34 kgs) 84455 5 in. (127 mm) 90 lbs (40 kgs) Cable Sheaves WIDTH DIAMETER ROOT Weight 71723 3 in.
Need help?
Do you have a question about the JAMB SKID and is the answer not in the manual?
Questions and answers