Bissell 6596 User Manual page 13

Troubleshooting Continued
Tools won't pick up dirt, continued
Possible Cause
Dirt Container full
3
Dirt Container or Upper Tank
4
not installed properly
Filters are dirty
5
Louver missing or installed incorrectly
6
Vacuum cleaner is difficult to push
Possible Causes
Incorrect Height Adjustment
1
Brush Cover installed incorrectly
2
Visible dirt escaping from cleaner
Possible Causes
Dirt Container full
1
Filters missing or installed incorrectly
2
Dirt Container installed incorrectly
3
Filter Cup installed incorrectly
4
or visit the BISSELL website - www.bissell.com
ug203-2829_6596_1105.indd 13 ug203-2829_6596_1105.indd 13
If suggested solutions do not correct the problem, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
Remedies
Empty Dirt Container
3
Position correctly and
4
lock in place
Check and clean Inner and Outer
5
Circular Filters and Pre-Motor Filters.
Replace HEPA Post-Motor Filter
Check for a clog in the tube in the
6
center of the Dirt Container, clear
and properly install Louvers
Remedies
Adjust Powerfoot to correct
1
height setting
Make sure all three latches
2
are secured
Remedies
Empty Dirt Container
1
Check Inner and Outer Circular
2
Filters and HEPA Post-Motor Filter
for correct installation
Pull out and re-insert Dirt
3
Container correctly
Remove Dirt Container and make
4
sure Filter Cup is fully attached
8 a.m. — 10 p.m. ET
9 a.m. — 8 p.m. ET
13
1/11/06 4:03:41 PM 1/11/06 4:03:41 PM