Advertisement
Implements Pty Ltd
AGRICULTURAL ENGINEERS
OPERATOR'S MANUAL
PRODUCT NO.
0175
0176
0177
0178
130 FRANKSTON-DANDENONG RD, DANDENONG SOUTH, VIC. 3175 AUSTRALIA
PHONE (03) 9791 2494
berends@johnberendsimplements.com.au
John Berends
PARTS LIST
Grow-Master Aerator
Grow-Master 2000 (6'7")
Grow-Master 2400 (7'11")
Grow-Master 2800 (9'3")
Grow-Master 3200 (10'6")
(ABN 79 007 035 369)
FAX NO. (03) 9794 5568
www.johnberendsimplements.com.au
Advertisement
Table of Contents
Summary of Contents for John Berends Implements Pty Ltd Grow-Master 2000
- Page 1 John Berends Implements Pty Ltd AGRICULTURAL ENGINEERS OPERATOR’S MANUAL PARTS LIST Grow-Master Aerator PRODUCT NO. 0175 Grow-Master 2000 (6’7”) 0176 Grow-Master 2400 (7’11”) 0177 Grow-Master 2800 (9’3”) 0178 Grow-Master 3200 (10’6”) 130 FRANKSTON-DANDENONG RD, DANDENONG SOUTH, VIC. 3175 AUSTRALIA (ABN 79 007 035 369) PHONE (03) 9791 2494 FAX NO.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Page No. SAFETY INSTRUCTIONS..................3 INTRODUCTION…………………………………………………………….…………….5 SAFETY FEATURES..................... 6 ASSEMBLY......................7 OPERATION......................8 MAINTENANCE..................... 8 SPARE PARTS...................... 9... - Page 3 SAFETY Farm machinery is dangerous if operated incorrectly so please read this manual in its entirety prior to operating the machine. No operator, however experienced in farm machinery operation, should attempt to use any machine they have not been competently trained to use. Your local Department of Agriculture can help you with training, as can most Occupational Health and Safety offices, Agricultural schools and colleges and farm equipment dealerships.
- Page 4 If machine starts to vibrate, stop tractor, turn off engine and investigate. After striking a foreign object or if there are doubts about the performance of the machine, stop the tractor as described and check if machine is making excessive noise. Extreme caution must be taken when working in public areas (roadsides etc).
-
Page 5: Introduction
INTRODUCTION: This manual was developed specifically for the machine you have purchased. The information within is to assist you in preparing, operating and maintaining your machine. Please read and understand the contents of the manual completely before attempting to operate your machine, paying special attention to all safety details. -
Page 6: Safety Features
Safety Features 1. SERIAL NUMBER DECAL 2. WARNING DECAL 3. BERENDS DECAL 4. CAUTION DECAL... -
Page 7: Assembly
ASSEMBLY The Grow-master aerators are completely assembled prior to delivery. When connecting to the tractor, the four support legs should be in place so that the machine is standing unaided on the ground. Always have the machine standing on flat and stable ground (preferably concrete) when not connected to the tractor. - Page 8 adjustments. If it is connected to the tractor, gently lower the aerator so that the tines are resting on the ground. Put the tractor in park and switch it off before doing any work. It is advisable that the rotor angle be changed whilst connected to the tractor as the rotor is heavy and can be difficult to reposition whilst off the ground.
-
Page 9: Maintenance
MAINTENANCE When doing any type of maintenance on this machine, always follow the safety steps described in this manual. Use only authorised genuine parts for replacement. The aerator must be adequately supported under its body (Make certain it cannot move/fall). Use the four stands supplied, to do this. -
Page 10: Spare Parts
SPARE PARTS ORDER SPARE PARTS THROUGH YOUR ORIGINAL SUPPLIER OR YOUR LOCAL JOHN BERENDS IMPLEMENTS DEALER. Always quote the machine serial number or product number, spare part number and its part name as stated in the operator’s manual Grow-master Aerator Key No.
Need help?
Do you have a question about the Grow-Master 2000 and is the answer not in the manual?
Questions and answers