Airpura G600 Operating & Filter Replacement Directions

To open the filter chamber

Turn over Remove the 4 Take off
the Airpura retaining screws the cover
Place the HI-C filter
Unfold the filter slider
around the Hepa filter and
(Supplied with replacement
Attach the HI-C filter with
filters or on request
the elastic bands
Part#6F 001)
Open the top of the Insert the Let the canister
spiral to make a Carbon canister slide down
slight funnel into the funnel and thefilter slider
hold it straight

To close the filter chamber

Replace Position the
the gasket indentation in the cover
into the center of the
HEPA filter
Remove
Position Place a felt gasket at
the gasket
the Prefilter the bottom of the
inside the filter filter chamber
chamber
Roll it Insert the tube into Let the spiral open to
into a spiral the filter chamber fill the opening
inside the Prefilter
Pull the filter slider Remove the filter
up out of the cavity slider and fold it for
using both hands further use
and let the canister
slide to the bottom
of the cavity
Replace Turn the Airpura
the 4 screws back on casters
and tighten
G600
Slide in the
Hepa filter
OPERATING
&

FILTER REPLACEMENT

DIRECTIONS