Subscribe to Our Youtube Channel
Summary of Contents for Solena MINI-PAR-3
- Page 1 User's Manual MINI-PAR-3 3*8W RGBW 4-in-1 LED PAR LIGHT ATTENTION: Read this manual before using. Do not attempt to open the housing or repair this device by yourself without contact us!
-
Page 3: Troubleshooting
General Instructions * Under [CH]，press ENTER into DMX512 channel setting. * Press UP/DOWN to select channel CH06 or CH24，press ENTER to save the selection. Press Unpacking: MENU to the previous setting. Thank you for purchasing this product. Please read user guide for safety and operations (8) Sound sensitivity setting information before using the product. - Page 4 (4) SOUND mode Setting This product is for indoor use only! Use only in dry locations. Keep this device away from rain and moisture, excessive heat, humidity and dust. Do Sod1 Soud not allow contact with water or any other fluids, or metallic objects. Make sure there are no flammable materials close to the fixture(s) Sod3 while operating.
- Page 5 *Press S00-S16 to set strobe speed. Value to 00, no strobe; value 01-16, strobe speed is 1HZ-16HZ. LED Expected Lifespan (2) Static color Setting LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating CoLo CC01-CC15 temperatures than in ideal or singular optimum conditions.
- Page 6 Fixture Appearance Sod1 Soud Sod5 d001-d512 d001-d512 SLAu CH05 CH08 001----100 SEnS LCD Digital Operation Details (1) Color brightness adjustment r000-r255 r000-r255 rgbu g000-g255 g000-g255 b000-b255 b000-b255 1. LED bulbs, 2. hanging handle, 3. LCD Digital display u000-g255 u000-g255 4. key menu: menu, enter, up, down,5. DMX linking XLR IN/OUT, 6.Power source S 00-S 16 * On the MENU [rgbu], press ENTER to set color selection...
- Page 7 LCD Digital Display AUTO Auto cycles the built-in programs without being controlled externally. It has no light OFF. Stand-Alone Operation (Sound Active, AUTO mode) The mode allows a single unit to react to the beat of the music in the master mode. MENU: Function mode selection, such as DMX512/Masterslave, AUTO strobe, Sound Active 1.
- Page 8 Universal DMX Operation (DMX mode) The system only accepts the DMX512 signal of international standard to control the Channel Function Value Description system. This mode allows you to use universal DMX-512 console to operate. 0-31 Color controlled by CH1 to CH5, no all color change 1.
Need help?
Do you have a question about the MINI-PAR-3 and is the answer not in the manual?
Questions and answers