Connecting to an amplifier equipped with a DTS decoder
Digital Theater System(DTS)
DTS is high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If
you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video
discs or audio CDs.
You must set the LINE SELECT
switch to the "Out" mode
Right side of unit
IN
OUT
V O L U M E
P H O N E S
A U D I O
V I D E O
LINE SELECT
S-VIDEO OUT
To AUDIO IN/OUT
To digital audio input
Optical cable (Not supplied)
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTE:
When you are connecting (via the OPTICAL OUT) an AV decoder that does not have the Dolby Digital, Digital
Theater System (DTS) or MPEG2 decoding, be sure to set Digital Audio Output of this DVD player to "PCM"
from the SETUP menu. Otherwise, high volume sound may damage your hearing as well as the speakers.
Front speaker
(right)
Amplifier equipped with a
DC IN 9.8V
DTS decoder
(optical)
Center
speaker
Front speaker
60
Sub woofer
Rear speaker
(right surround)
Rear speaker
(left surround)
(left)