Advertisement
Quick Links
AU: 1800 029 701
N Z: 0800 466 444
For construction in non-cyclonic areas
Wind rating: N2 as per AS4055-2012.
If you require a higher wind rating please contact
us: admin@absco.com.au or 1800 029 701
MANU FA CT URED
IN A US TR ALIA
SNAPTiTE
Assemb ly
Absco Industries
Assembly Instruction Manual
ABSCO REGENT SHED
MODEL: 15141RK
1.52mW x 1.44mD x 1.96mH
admin@absco.com.au
www.abscosheds.com.au
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
We thank you for choosing an Australian made
shed. For further assistance please visit our detailed
instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
of our instructions. Feedback makes us better.
feedback@absco.com.au
Download the Absco
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
Sheds Assembly App
for instructional videos
Absco Industries
Premier Shed Model: 23151GK
When laying concrete slab, ensure there
is a rebated edge 25mm deep around
the perimeter. This will help water egress
from the base of the shed.
SHED MODEL: 23151GK
Model: 15141RK
FRONT: 2.26m
SIDE:
HEIGHT: 1.95m
BOTTOM CHANNEL
REBATED EDGE
75mm WIDE REBATE
CONCRETE SLAB
21-11-2017
14/09/18
1.1
1.52m
PAGE 01
1
Advertisement
Summary of Contents for Absco 15141RK
- Page 1 Http://www.abscosheds.com.au/watch-videos us: admin@absco.com.au or 1800 029 701 from the base of the shed. At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au...
- Page 2 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"...
- Page 3 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH COMPONENT PACKING LIST Check off all components. COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION STEEL SHEET 1785mm X 773mm CHANNEL L = 1513mm STEEL SHEET 795mm X 773mm CHANNEL...
- Page 4 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH COMPONENT PACKING LIST PART COMPONENT PART COMPONENT CHECK CHECK DESCRIPTION DESCRIPTION CHANNEL WITH HINGES JAMB L= 1785mm L = 1725mm CHANNEL JAMB L= 783mm L = 1725mm CHANNEL JAMB L= 1120mm...
- Page 5 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
- Page 6 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH OVERVIEW OF ROOF COMPONENTS Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18...
- Page 7 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH OVERVIEW OF WALL COMPONENTS Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18...
-
Page 8: Rear Panel Assembly
ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH REAR PANEL ASSEMBLY 1x required. Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18... - Page 9 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH ROOF PANEL ASSEMBLY 2x required. Fit 81E to edge of sheet with pre- punched holes. Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18...
- Page 10 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH RIGHT SIDE PANEL ASSEMBLY 1x required. Small pan Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18...
- Page 11 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH LEFT SIDE PANEL ASSEMBLY 1x required. Small pan Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18...
-
Page 12: Front Panel Assembly
ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH FRONT PANEL ASSEMBLY 1x required. Absco Industries Assembly Instruction Manual Model: 15141RK 14/09/18... - Page 13 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH DOOR PANEL ASSEMBLY DOOR PANEL ASSEMBLY SINGLE DOOR 1x required. Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of...
-
Page 14: Door Panel Assembly
ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of rivets. Use a 4mm drill bit to enlarge these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment. - Page 15 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not pre- punched.
- Page 16 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH OUTSIDE VIEW INSIDE VIEW OF FIXING Secure ridge beam to ROOR OVERHANGS gable sections with ALL WALL PANELS two screws at each BY 37mm end. Secure each roof panel with one screw...
- Page 17 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH FINAL CONSTRUCTION Bend the top and bottom flanges as shown, then hook the bottom flanges under the top channel and screw top to the ridge beam with two screws. ANCHORING OF SHED...
- Page 18 2.G The drawings provided herein are for installation and structural engineering purposes only. • If discrepancies are discovered within the documentation provided, these shall be brought to the attention of Absco and written approvals obtained prior to commencing the affected section of work. • 3.G If in doubt ask.
- Page 19 ABSCO REGENT SHED MODEL: 15141RK 1.52mW x 1.44mD x 1.96mH Absco Gable Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade •...
- Page 20 • Absco accepts no responsibility for water entry, fl oor moisture, condensation or the condition of the Contents inside your Absco steel building arising from any of the pre-mentioned weather conditions.
- Page 21 Absco, along with a copy of your proof of purchase. The bene ts of this warranty are in addition to your rights under the Australian Consumer Law (ACL) and in particular, the guarantees implied under the ACL and any other rights and remedies of the consumer under a similar law in relation to the goods and services to which this warranty relates.
- Page 22 If you do not wish to register your warranty online, complete the below form and email, fax or post this form back to Absco, along with a copy of your proof of purchase. NAME:...