Advertisement
이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.
4. Disassembly and Assembly
Part
Main
System
SENS Q40 < 4 - 2 >
Picture
Description
6. Remove the Thermal Plate의 Screw
(4ea).
7. Remove the Hinge Cap by using
the tweezers.
8. Remove the screws(2EA) and LCD
cable screw(1EA) at yellow circle that
combine Hinge and Top.
9. Pull out the LCD cable and detach
the LCD Assy
(
Caution : When separate the Antenna cable
first separate antenna from Bottem by using
tweezers then separate each antenna by using
hand cautiously)
Advertisement
