Advertisement
Quick Links
Quick Guide
Tempod
®
20B / 50XB / 100XB / 200XB
®
Bluetooth
Temperature Data Logger
T: +86 755 8420 0058
F: +86 755 2571 2314
E: sales@eofirm.com
W: www.eofirm.com
1> Connect to Data Logger via Bluetooth
Open TempSen Go App on your smart device, tap any data logger shown on Device page to connect
to this data logger. When in Device page, TempSen Go will automatically scan and search all TempSen
Bluetooth loggers within communication range (30 meters sight range).
You need to enter correct AccessKey if current data logger was protected with AccessKey with protection
level 2. You could scan the QR code on front side of logger to connect to this logger directly.
2> Configuration (3 options)
▼ Configure Device via TempSen Go App
App changes to Device Connected page after successfully connecting to data logger, tap
bottom bar to enter into Configure Device page, in which you could select and enter parameters you
need for configuration, and then tap
at bottom to apply these configurations to data logger connected.
▼ Configure Device Online
®
Connect Tempod
data logger to PC via USB connection, open online configuration portal
www.tempodlogger.com
in internet browser, then select the device you are going to configure, input
configuration parameters, download configuration profile (.cfg) and save it to the logger created
Removable Storage Device "TempSenDisk" .
Configuration profile created contains Local Time Zone information, so please download
new configuration profile when you are in different time zone to avoid time error.
▼ Configure Device via TempCentre
Connect logger to computer, open TempCentre software, move to Configure Device mode, enter
configuration parameters, and click on Apply to complete configuration. Please DO NOT remove logger
from PC before you are prompted of configuration success.
Please download TempCentre software from www.tempsen.com/software/tempcentre
▼ LCD After Configuration
← Auto
Wait for recording begins at preset time automatically after
configuration.
button at
↑ Configuration
success
↑ Standby
Ready for Manual Activiation after configuration
(Press Start button to activate device). Temperature
unit appears in right indicating device was set to
condition start (After device manually activited,
recording begins after temperature meets preset
temperature conditions).
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EO Tempod 20B
Summary of Contents for EO Tempod 20B
- Page 1 Quick Guide 1> Connect to Data Logger via Bluetooth Open TempSen Go App on your smart device, tap any data logger shown on Device page to connect to this data logger. When in Device page, TempSen Go will automatically scan and search all TempSen Bluetooth loggers within communication range (30 meters sight range).
- Page 2 Quick Guide 3> Start Recording 6> AccessKey You could enable and apply AccessKey (Device Password) to data logger after connecting to logger via App or during configuration, once applied, user will be required to provide correct AccessKey when Press and hold button for 3 seconds to activate device and start recording.
- Page 3 Tempod 20B / 50XB / 100XB / 200XB ® ▼ Logging Statistics 9> LCD ▼ Full Screen Click button to step through following recording statistics screens. 1 Status: Statistics Max: 37.5°C 3 Marked events: 3 ▼ Errors Error 004 E004 Device reset Error 006 E006...
- Page 4 Quick Guide 10> Battery 12> Warranty ▼ Battery Indicator TempSen warrants this TempSen-branded hardware product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from shipment date Battery indicator may not accurately reflect actual (“Warranty Period”).
Need help?
Do you have a question about the Tempod 20B and is the answer not in the manual?
Questions and answers