Table of Contents
Advertisement
Quick Links
Congratulations. You have just purchased a superior glass drilling machine that will give you years of
service with minimum maintenance. The CRL AMZ1 Machine is unique because it is a portable precision
drilling machine with electronically adjustable speed control, center water feed, and a locking cup design.
UNPACK AND VERIFY RECEIPT OF THE FOLLOWING COMPONENTS:
1 AMZ1 Diamond Drilling Machine
1 Drilling up-down handle
2 Wrenches 24mm and 1-1/16"
The AMZ1 is shipped with the drilling up-down handle removed to prevent shipping damage. To install,
slide into side mount and tighten with wrench provided.
NOTE: An optional Coolant Supply Container is available for use with this machine. To order, please contact
us and request Catalog No. PTA.
ALSO CHECK TO ENSURE THE FOLLOWING:
• Drilling handle should move up and down smoothly
• Drill chuck should spin freely by hand
• Rubber cups and pads should be smooth with no scratches
• No loose or damaged parts should be evident
Please contact us immediately if parts are missing or defects are noted per above list. In this case, also
save all shipping containers, which may be necessary to file damage claim with the shipper.
PRODUCT SPECIFICATIONS
Voltage: 110 / 220 VAC 50 / 60 HZ
Maximum Drilling Capability 4" (102mm)
Motor Speed: 0 to 2900 RPM
Drilling Depth 1-1/2" (40mm)
Net Weight: 34 lbs. (15Kg.)
CRL Portable Production Glass Diamond Drilling Machine
Catalog No. AMZ1
Operating Instructions
1 Allen wrench to install feed handle
1 Coolant supply hose
1 Retaining ring with rubber base
Advertisement
Table of Contents
Related Manuals for CRL AMZ1
Summary of Contents for CRL AMZ1
- Page 1 Congratulations. You have just purchased a superior glass drilling machine that will give you years of service with minimum maintenance. The CRL AMZ1 Machine is unique because it is a portable precision drilling machine with electronically adjustable speed control, center water feed, and a locking cup design.
- Page 2 Plug directly into grounded outlet. Your AMZ1 Machine features an electronic speed control that will accept 110 or 220 volt input in either 50 or 60 cycle power. To use this machine with a 220 volt circuit, contact a qualified electrician to provide you with a properly fused and grounded circuit, and to supply connections.
- Page 3 See instructions packaged with each diamond drill for optimum speed selection. The AMZ1 Machine is held to the glass while drilling with two rubber locking cups. You may adjust the holding power of these cups by adjusting the knurled washer on the top side of the cup. To release cups, lift lever and pull up on side of cup with fingers to release pressure.
- Page 4 15) Unplug machine from the power supply and clean off any glass/water residue. ROUTINE MAINTAINANCE Your AMZ1 Diamond Drilling Machine is designed and built to give you extended service. Drilling of glass presents tough operating conditions due to the abrasive nature of ground glass particles and the damp environment of wet drilling.
- Page 5 Your AMZ1 Drilling Machine has a 6-month major component warranty. If during this time, failure occurs during normal use, then CRL will repair or replace at no charge to the Purchaser. This warranty is null and void if machine has been misused or disassembled by customer. Electrical components and base cups are not covered under this warranty.
- Page 6 CRL PRODUCTION DIAMOND GLASS DRILLING MACHINE Catalog No. AMZ1 PARTS LIST...
- Page 7 Metal bond drills offer the greatest life of all type glass drills. The quality of CRL Metal Bond Diamond Drills is the finest -available and have a 3/8" deep cutting matrix filled with -diamonds and bronze bond that are more fragile than plated drills.
- Page 8 A Portable Production Diamond Glass Drilling Machine Cat. No. AMZ1 Operating Instructions...
Need help?
Do you have a question about the AMZ1 and is the answer not in the manual?
Questions and answers