Table of Contents
Advertisement
Quick Links
10W & 20W LED RECHARGEABLE
WORKLIGHTS
19546, 19562
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper 19546
Summary of Contents for Draper 19546
- Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
- Page 2 12. DISPOSAL 12.1 DISPOSAL At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area. In all circumstances: –...
-
Page 3: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 4: Table Of Contents
2. CONTENTS 2.1 CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION ......................... 1 1.2 REVISION HISTORY ......................2 1.3 UNDERSTANDING THIS MANUAL..................2 1.4 COPYRIGHT NOTICE......................2 2. CONTENTS 2.1 CONTENTS ......................... 3 3. GUARANTEE 3.1 GUARANTEE ........................4 4. INTRODUCTION 4.1 SCOPE ..........................5 4.2 SPECIFICATION ......................... -
Page 5: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 6: Introduction
These 10W & 20W Rechargeable Worklights are for use where mains power is not easily obtainable. They are recharged via a 230V AC Adaptor/Charger or 12V DC cigarette type charger (both supplied). 4.2 SPECIFICATION Stock no............19546 ............19562 Part no............RWL10LEDD...........RWL20LEDD Wattage ............. 10W ..............20W Battery: Type ............ -
Page 7: Health And Safety Information
5. HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE Warning: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool”... -
Page 8: Additional Safety Information
5. HEALTH AND SAFETY INFORMATION 5.2 ADDITIONAL SAFETY INFORMATION – Do not aim beam at bystanders or animals. Do not look directly into light source. – Do not operate without all seals, front glass and coverings in place. – Ensure the rated voltage marked on the worklight is correct and connected to an appropriately rated switch. -
Page 9: Technical Description 6.1 Identification
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the worklight. -
Page 10: Identification
6. TECHNICAL DESCRIPTION 6.1 IDENTIFICATION *19546 shown On/Off switch. Lamp head bracket. Lamp head. Stand fixing bolt. Foam grip carry handle. Angle tightening bolt. COB LED panel. Power input socket. Stand. - 8 -... -
Page 11: Assembly 8.1 Assembly
8. ASSEMBLY 8.1 ASSEMBLY – FIG.1 *19546 shown – To attach the lamp head to the bracket , thread a washer on each of the angle fixing bolts then insert the bolts through the holes each side of the bracket, then into the side holes located on the lamp. -
Page 12: Operation And Use
9. OPERATION AND USE BATTERY CHARGING - FIG. 2 *19546 shown WARNING! Ensure the worklamp is turned off before charging. – Insert the transformer's jack plug from either the 230V AC charger or 12V DC charger into the power input socket... -
Page 13: Operation
9. OPERATION AND USE OPERATION - FIGS. 3 - 5 *19546 shown To turn on the lamp, select the On position ( I ) of the on/off switch To turn the lamp off select position ( O ). The angle of the light source can be adjusted by tilting the lamp head to the required positon. -
Page 14: Maintenance
10. MAINTENANCE 10.1 MAINTENANCE – FIG. 11 There are no replacement or maintainable parts to this product. - 13 -... -
Page 15: Explanation Of Symbols
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. Warning! Read the instruction manual. Warning! Do not aim beam at bystanders or animals. Do not look directly into light source. Water ingress protection compliancy rating. -
Page 16: Disposal 12.1 Disposal
©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 19546 and is the answer not in the manual?
Questions and answers