Reset Network; Factory Data Reset - Prestel VCS-F1 User Manual

Integrated Intelligent HD Video Conference Terminal
Step 4 Select "OK", save configuration information.
Step 5 End.
Parameter
Use DHCP settings
Use static settings
IP address
Gateway
Subnet mask
Domain1
Domain2

6.4 Reset Network

Step 1 Enter the GUI main interface, select "Main Menu > Settings > Personal > Backup &
reset".
Step 2 Select "Network settings reset > reset settings", reset network settings such as WLAN,
mobile network and Bluetooth etc.
Step 3 End.

6.5 Factory Data Reset

Step 1 Enter the GUI main interface, select "Main Menu > Settings > Personal > Backup &
reset".
Step 2 Select "Factory data reset", restore the terminal to factory settings.
Step 3 End.
After restoring the factory settings, all the terminal parameters you configured earlier will be lost,
please be careful settings!
Description
The terminal automatically obtains IP address through DHCP server.
The IP address of the terminal is assigned by the network
administrator. You need to enter parameters such as IP address,
gateway and subnet mask etc.
Configure the IP address of the terminal.
Configure the default gateway address of the terminal.
Configure the subnet mask of the terminal.
Configure the domain name address 1 of the terminal.
Configure the domain name address 2 of the terminal.
12
User Guide