Operating Instructions 1 - INTRODUCTION. Dear user. Thank you purchasing your FOS 400 lifter. We hope you will be very satisfied with it. This manual has been written so that you can understand how to effectively use the lift and most importantly, so that you can use it safely. It is important that you fully read the manual and follow the instructions carefully before using your lift.
Operating Instructions 3 - SAFETY GUIDELINE. 3.1.- Situate the tower on a solid and flat surface. 3.2.- Check that the support system is fixed by the security trigger and that the tower is in a upright position. 3.3.- Check that the tower is locked in its working position with the safety lock. 3.4.- When used outdoors, place the tower on a hard surface and if necessary secure it against excess wind force via cable braces.
Operating Instructions 4.5.- Hold: Release the winch handle, it will remain in position by the action of the winch’s automatic brake. Ensure the FOS lock has introduced in to the profile by turning the handle slightly anti-clockwise. 4.6.- Continue elevating: Turn the winch handle again clockwise and lift the load until the second profile is fully extended.
6.- WARRANTY. All FOS TECHNOLOGIES lifts come with 2 years warranty. This warranty period is from the date of purchase. FOS will repair any defect product caused by either faulty materials or poor workmanship free of charge within this period as long as the parts are fitted by an authorized dealer.