ebm-papst S4E350-AN02-60-CTN Operating Instructions Manual

Part Number
S4E350-AN02-60-CTN
Operating Instructions
ebm-papst A&NZ Pty Ltd
10 Oxford Road
Laverton North VIC 3026
Australia
Phone: +61 3 9360 6400
Fax: +61 3 9360 6464
sales@ebmpapst.com.au
www.ebmpapst.com.au
CONTENTS
1. SAFETY REGULATIONS AND NOTES .......................... 1
1.1 Hazard levels for warnings ............................................... 1
1.2 Staff qualification .............................................................. 1
1.3 Basic safety rules ............................................................. 1
1.4 Voltage ............................................................................. 1
1.5 Safety and protective features .......................................... 2
1.6 Elecrtomagnetic radiation ................................................. 2
1.7 Mechanical movement ...................................................... 2
1.8 Emission ........................................................................... 2
1.9 Hot surface ....................................................................... 2
1.10 Transport .......................................................................... 2
1.11 Storage ............................................................................. 2
2. INTENDED USE ............................................................... 3
3. TECHNICAL DATA .......................................................... 4
3.1 Product drawing ................................................................ 4
3.2 Nominal data .................................................................... 5
3.3 Technical description ........................................................ 5
3.4 Mounting data ................................................................... 5
3.5 Transport and storage conditions ..................................... 5
4. CONNECTION AND START-UP ..................................... 6
4.1 Mechanical connection ..................................................... 6
4.2 Connecting the electrical system ...................................... 6
4.2.1 Requirements ..................................................... 6
4.2.2 Voltage control .................................................... 6
4.2.3 Variable frequency drive ..................................... 7
4.3 Connection in terminal box ............................................... 7
4.3.1 Preparing connection lines for the connection ... 7
4.3.2 Connecting cables with terminals ....................... 7
4.3.3 Cable routing ...................................................... 7
4.4 Connection diagram ......................................................... 8
4.5 Checking connections ...................................................... 8
4.6 Switching on the device .................................................... 8
4.7 Switching off the device .................................................... 8
5. MAINTENANCE, MALFUNCTIONS, POSSIBLE
CAUSES AND REMEDIES .............................................. 8
5.1 Cleaning ........................................................................... 9
5.2 Safety inspection .............................................................. 9
5.3 Disposal ............................................................................ 9
5.3.1 Country-specific legal requirements ................... 9
5.3.2 Disassembly ....................................................... 9
5.3.3 Component disposal ........................................... 9
Item no. LS-090.
ebm-papst A&NZ Pty Ltd 10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556 NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au

1. SAFETY REGULATIONS AND NOTES

Read these operating instructions carefully before starting work
on the device. Observe the following warnings to prevent
malfunctions or danger to persons.
These operating instructions are to be regarded as part of the
device. The device is only to be sold or passed on together with
the operating instructions.
These operating instructions may be duplicated and distributed
to inform about potential dangers and their prevention.

1.1 Hazard levels for warnings

These operating instructions use the following hazard levels to
indicate potentially hazardous situations and important safety
regulations:

1.2 Staff qualification

The device may only be transported, unpacked, installed,
operated, maintained and otherwise used by suitably qualified,
trained and authorised staff.
Only authorised specialists are permitted to install the device, to
carry out a test run and to perform work on the electrical
installation.

1.3 Basic safety rules

The safety hazards associated with the device must be
assessed again following installation in the final product.
Note the following when working on the device:
Do not perform any modifications, additions or conversions

on the device without the approval of ebm-papst A&NZ.

1.4 Voltage

Check the electrical equipment of the device at regular

intervals, see Chapter 5.2 Safety inspection.
Replace loose connections and defective cables

immediately.
Revision 003 Release 18/11/2015
DANGER
Indicates an imminently hazardous situation which
will result in death or serious injury if the specified
actions are not taken. Compliance with the
instructions is imperative.
WARNING
Indicates a potentially hazardous situation which can
result in death or serious injury if the specified actions
are not taken. Exercise extreme caution while
working.
CAUTION
Indicates a potentially hazardous situation which can
result in minor or moderate injury or damage to
property if the specified actions are not taken.
NOTE
A potentially harmful situation can occur and, if not
avoided, can lead to property damage.
Page 1 of 9