Table of Contents
Advertisement
18V
Cordless
Pole Saw
N0F-GT-250/18-D
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your pole saw, ensuring it is assembled correctly
and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
ORIGINAL
INSTRUCTION
MANUAL
AFTER SALES SUPPORT
0345 605 2067
Advertisement
Table of Contents
Summary of Contents for Spear & Jackson N0F-GT-250/18-D
- Page 1 ORIGINAL INSTRUCTION MANUAL Cordless Pole Saw N0F-GT-250/18-D Important - Please read these instructions fully before starting assembly AFTER SALES SUPPORT 0345 605 2067 These instructions contain important information that will help you get the best from your pole saw, ensuring it is assembled correctly and safely.
- Page 2 SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance, comfort and durability firmly in mind, which has earned Spear &...
-
Page 3: Table Of Contents
CONTENTS Safety Information Description of symbols Warning symbols on the charger Warning symbols on the battery pack General safety Additional safety instructions for batteries and chargers Additional safety instructions for pole saw Training Prepare Operate Intended use Box Content / Parts Assemble Unpacking Assemble the front handle... -
Page 4: Safety Information
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the pole saw. Guaranteed sound power level in Read instruction handbook before 93dB. -
Page 5: Warning Symbols On The Charger
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine WARNING SYMBOLS ON THE BATTERY WARNING SYMBOLS ON THE CHARGER PACK Batteries contain Li-ion, waste Read instruction handbook before batteries should be sorted for eco- operating this machine. friendly. -
Page 6: General Safety
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine GENERAL SAFETY flammable liquids, gases GENERAL POWER TOOL or dust. Power tools SAFETY create sparks which may WARNING Read all ignite the dust or fumes. safety warnings and ■... - Page 7 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine ■ Do not expose power current device(RCD)” tools to rain or wet may be replaced by the term “ground fault circuit conditions. Water entering a power tool will increase interrupter (GFCI)”...
- Page 8 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine ■ Prevent unintentional hair can be caught in moving parts. starting. Ensure the switch is in the off-position ■ If devices are provided before connecting to for the connection of dust power source and/or extraction and collection battery pack, picking...
- Page 9 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine making any adjustments, with sharp cutting edges changing accessories, are less likely to bind and or storing power tools. areeasier to control. Such preventive safety ■ Use the power tool, measures reduce the risk accessories and tool bits of starting the power tool...
-
Page 10: Additional Safety Instructions For Batteries And Chargers
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine in use, keep it away from ADDITIONAL SAFETY INSTRUC- other metal objects, like TIONS FOR BATTERIES AND paperclips, coins, keys, CHARGERS nails, screws or other small metal objects, that can make a connection SAFETY WARNINGS FOR from one terminal to... - Page 11 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine ■ Battery pack needs nails, screws or other small metal objects, that to be charged before can make a connection use. Always refer to from one terminal to this instruction and use another.
- Page 12 SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine provided for use with the fire and/or serious equipment. A charger that injury. is suitable for one type of battery pack may create a Save all warnings and risk of fire when used with...
- Page 13 SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine ■ Do not charge the the battery charger from the supply mains. Then batteries of other remove the chassis manufactures or ill-suited connection and then the...
-
Page 14: Additional Safety Instructions For Pole Saw
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine as they can overheat and sure the saw chain is not break. contacting anything. A moment of inattention ■ Longer life and better while operating pole saws performance can be may cause entanglement obtained if the battery... - Page 15 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine injury. the likelihood of accidental contact with the moving ■ Always keep proper saw chain. footing and operate the ■ Follow instructions pole saw only when standing on fixed, secure for lubricating, chain and level surface.
- Page 16 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine PRECAUTIONS FOR POLE SAW ■ Never stand directly under Residual risks the limb you are trimming. Even when the tool is used Always position yourself as prescribed it is not out of the path of falling possible to eliminate all debris.
-
Page 17: Training
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine ■ The operator or user is medical implants. responsible for accidents To reduce the risk or hazards occurring of serious or fatal to other people or their injury, we recommend property. -
Page 18: Operate
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine intended use and is OPERATE not included in these instructions is considered ■ Operate the product only unauthorized use and in daylight or in good relieves the manufacturer artificial light. -
Page 19: Box Content / Parts
BOX CONTENT PARTS Working head Front handle Oil bottle cap Quick release for telescopic pole Bar sheath Main switch Guide Bar Hang buckle Saw Chain Konb Battery pack Pole Charger Tension Wheel Charger base Adjusting Wheel Safety lock-off button 100ml lubrication oil Shoulder strapper If there are any parts missing, please call the customer helpline on 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067... -
Page 20: Assemble
ASSEMBLE Unpacking i. Unpack all parts and lay them on a flat, stable surface. ii. Remove all packing materials and shipping devices if applicable. iii. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact the aftersales service within 28 days of purchase. -
Page 21: Assemble The Shoulder Strapper
ASSEMBLE Assemble the shoulder strapper Fill lubrication oil i. Push the oil bottle cap and unscrew it, and add proper lubrication oil. Note: Make sure the oil level is between Min and Max. ii. Tighten the oil bottle cap. AFTER SALES SUPPORT 0345 605 2067... -
Page 22: Charging The Battery
ASSEMBLE Charging the battery NOTE: This battery pack has been shipped in a low charge condition. It should be fully charged before first use. Make sure the main voltage is the same as rating label which located on the charger. WARNING! The charger and battery pack are specifically designed to work together so do not attempt to use any other... - Page 23 ASSEMBLE Connect the mains plug with charger (7) to the charger base (8) . 1. Plug the charger into an appropriate AC power outlet. The LED lights green to tell you that the charger is ready for use. 2. Slide the charger base (8) into the battery pack (6), make sure the charger base is fully seated in the battery pack.
-
Page 24: Check Battery Capacity
ASSEMBLE WARING! Don’t allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an un-insulated trailer. CAUTION! Never attempt to open the battery pack for any reason. -
Page 25: Operate
OPERATE Telescopic handle adjustment i. Lift the clamping lever and extend upper part of handle to desired handle length. Then push the clamping lever to fix the tube tight. Install battery pack i. Keep the battery pack in line with the holder on the device. ii. -
Page 26: Switching On/Off
OPERATE Attention! The battery cannot be charged immediately after use, it should cool off for a period of time. The LED lights switching from green to red means it can be charged. Switch on/off NOTE: Hold the pole saw away from yourself using both hands. -
Page 27: Chain Tension
OPERATE Chain Tension Loosen tension wheel (5) before adjusting chain. Turn the adjusting wheel (6) until slack is out of chain. Wearing protective gloves, pull down on chain to check Loosen chain tension Do not over-tension chain. Over-tensioning will cause Tighten excessive wear and will reduce the life of the guide bar and chain. -
Page 28: Pruning
OPERATE Pruning Warning! Always turn off the motor before laying down the machine! Risk of recoil! Recoil is caused by wood or other firm objects coming into contact with the top side or the tip of the saw rail. This may cause the machine to be thrown back with force at the operator, which may cause serious injuries. -
Page 29: Push Sawing
OPERATE Push sawing This technique involves sawing with the top side of the saw rail from bottom to top. The sawing chain pushes the machine backward toward the operator. If the saw rail becomes jammed, the machine may be thrown back toward the operator with great force. -
Page 30: Maintenance
MAINTENANCE This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly qualified person to have it checked and repaired. WARNING! Always switch the product off, disconnect it from the battery pack and let the product cool down before performing inspection, maintenance and cleaning work! General cleaning... - Page 31 MAINTENANCE Change the chain and bar i. Loosen tension wheel (A). Remove chain cover with adjusting wheel together. Loosen Tighten ii. Fit the chain around the bar ensuring that the direction of cutting edges the chain is as depicted in the picture on the bar. Fit the chain on the sprocket.
- Page 32 MAINTENANCE After chain tension is correct, tighten tension wheel (5) firmly. NOTE! When tensioned correctly it should be possible to pull one full chain link free of the bar channel with ease. - A new chain will expand its length during the first period of use.
- Page 33 MAINTENANCE diagram). Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced. Sharpening Saw Chain Keep chain sharp.
- Page 34 MAINTENANCE Filing Cutter Depth Gauges The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpening, reset cutter depth gauges. Place depth gauge tool (.025”) firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool.
- Page 35 MAINTENANCE Recycling and disposal i. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. ii. The product comes in a packaging that protects it against transportation damage.
-
Page 36: Troubleshooting
TROUBLESHOOTING Problem Possible cause Solution - Battery discharged - Charge rechargeable battery Product not running. - Battery pack does not sit - Install the battery pack once its place correctly again - Device defective - Contact service center -Incorrectly mounted saw -Mount saw chain correctly chain -Sharpen cutting teeth or placeon... -
Page 37: Technical Data
TECHNICAL DATA Model M0L-10ET-200 Nominal voltage of product with battery 18 V d.c. Chain speed 2.8m/s Cutting length 20 cm Bar/chain code 080SDEA041/91P033X Net weight 3.75 kg Vibrations 1.5 m/s² , K=1.5 m/s² Charger Model no. SMVCH001212000B Input voltage & power 230-240V~ 50/60Hz, 50W Output voltage &... - Page 38 TECHNICAL DATA A weighted sound pressurel: 78dB(A), K =2dB(A) A weighted sound powerl: 93dB(A), K =2dB(A) The guaranteed sound power level: 93dB(A) Wear ear protection The sound values have been determined according to noise test code given in EN 60745-1 ENISO 3744, using the basic standards EN 60745-1.
-
Page 39: Warranty
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2067, the majority of problems can be solved directly on the phone. 1. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights.
Need help?
Do you have a question about the N0F-GT-250/18-D and is the answer not in the manual?
Questions and answers