Advertisement
Quick Links
Room boost
Room boost 700 MHz
4G LTE AT&T T-Mobile
Booster instruc on
Package Contents
1.Booster
2.Outside Panel Antenna with RG58 Cables(50 or 45 feet)
3.Power Adapter
4.Inside Whip Antenna
5.Moun ng Screw Kit
6. 3M double-sided glue
Quick Install Diagram
Find the
Strongest Signal
Outside
Antenna Installa on
Connect
Power Supply
Room boost
Signal booster
Model: HT2018001
Cables to Booster
Inside
Antenna Installa on
Connect
1
Advertisement
Summary of Contents for Room boost HT2018001
- Page 1 Room boost Room boost 700 MHz Room boost 4G LTE AT&T T-Mobile Booster instruc on Signal booster Model: HT2018001 Package Contents 1.Booster 2.Outside Panel Antenna with RG58 Cables(50 or 45 feet) 3.Power Adapter 4.Inside Whip Antenna 5.Moun ng Screw Kit 6.
- Page 2 1.Find the Strongest Signal Take your cell phone and walk around the house where you Booster need to install the . You can find the loca on of the strongest signal, and the outdoor antenna is best installed in this loca on. 2.Outside Antenna Installa on The outdoor antenna must be installed on the roof or height.
- Page 3 If the space is limited, try to make the outdoor antenna higher, otherwise the Booster will not work properly. >19 feet separation Room boost Booster is fixed to the desktop or >13 feet wall by 3M...
-
Page 4: Connect Power Supply
If the product becomes overheated, it will automa cally shut off or cause permanent damage. 3.Use only the power supply provided by Room boost. Any other non-approved products by Room boost of self-made power cables may damage the booster. -
Page 5: Antenna Kitting Information
Antenna Kitting Information Gain/Loss Component Prod No. Notes 698~787M 824~894 1850~1990 1700MHz\2100 Descrip on Outside Cable HT240 45Feet 2.9dB 3.3dB 4.8dB 4.8dB\5.2dB Outside Cable HTG58 45Feet 6.9dB 7.5 dB 11.7 dB 11.1dB \12.3dB Outside Cable HT400- 75Feet 4.2dB 4.4dB 6.1dB 5.8dB\6.5dB Inside Cable HTG6 75Feet... - Page 6 Descrip on of network protec on features: This booster including safeguards to protect the cellular network from interference. Each Signal Booster is individually tested and factory set to ensure FCC compliance. 1.The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware.
Need help?
Do you have a question about the HT2018001 and is the answer not in the manual?
Questions and answers