Advertisement
Quick Links
F Series Fan Instructions
FL 107, FL107/90, FL 150, FL 204, FL 250, FL 325
Mounting Instructions
1. Cut the mounting hole (as required) in the enclosure using the dimensions shown next page, respecting the
tolerances indicated.
2. Insert the fan filter into the mounting hole. Note: the bottom side is marked by the logo plate down on the
right.
3. Push on each corner of the cover so that the fan filter is correctly clamped.
Attention: Press on the fan filter up to the required depth so that the clips return to their original position.
Fix the fan filter using the clips provided or four screws in each corresponding hole within the corners of the
base.
Advertisement
Summary of Contents for ITC FL 107/90
- Page 1 F Series Fan Instructions FL 107, FL107/90, FL 150, FL 204, FL 250, FL 325 Mounting Instructions 1. Cut the mounting hole (as required) in the enclosure using the dimensions shown next page, respecting the tolerances indicated. 2. Insert the fan filter into the mounting hole. Note: the bottom side is marked by the logo plate down on the right.
- Page 2 FL 325 Cut out Screen Dimensions Model A (mm) Plate thickness (mm) F 107, FL 107, FL 107/90 minimum 1 – maximum 2 F 150, FL 150 minimum 1 – maximum 2.1 F 204, FL 204 minimum 1 – maximum 2.1 F 250, FL 250 minimum 1 –...
- Page 3 Fan Filters – electrical connection of the fan filters The voltage and frequency must be according to the rated values stated on the label. The electrical connection must be carried out according to the local standards and safety regulations which govern the use of electrical material.
Need help?
Do you have a question about the FL 107/90 and is the answer not in the manual?
Questions and answers