1 Brief introduction The CK350-VN infrared thermal imaging system is based on our network monitoring system over WAN or LAN. It can be configured as a stand-a-lone monitoring system or can also be incorporated into existing site systems which have an online monitoring system, digital image system or security fire alarm system.
3 Connection 3-1 Connect to the camera This part will show you how to connect the camera. Connect the camera and the computer to a router via LAN cable, and then run the SatMonitor Net version in your computer to start to use the camera.
4 Precaution and Maintenance 4-1 Precaution Input voltage of CK350-VN is 220V AC. It Voltage would damage the camera if the voltage exceeds the range. working temperature range Temperature CK350-VN is -35℃ to +50℃. Exceeding the limit temperature may cause abnormalities.
5 Accessories List Item Amount camera AC adapter LAN Cable Pan-tilt Calibrate report User manual Data CD Warranty Screws CD Content Dataload file User manual...
6 Specification Model CK350-VN Image presentation CCD Camera 640 x 480 full color Detector type UFPA Resolution 384x288 8~14 μm Spectral range ≤50mK@30℃ Thermal sensitivity FOV / Min. focus distance 11°×8.2°/0.5m Spatial resolution 0.5mrad -20℃~ +250 ℃, up to 2000°C...
Need help?
Do you have a question about the CK350-VN and is the answer not in the manual?
Questions and answers