Klarstein 10032679 Manual page 43

Cleaning the dishwasher
• Clean the control panel with a slightly damp cloth and then dry it thoroughly.
• Maintain the housing with a suitable polishing wax.
• Do not use sharp objects, scouring pads or aggressive cleaning agents for
cleaning.
• Clean the edge of the door with a warm, damp cloth. To prevent water from
entering the locking mechanism, do not use spray cleaners.
How to protect the device from frost damage
In winter, take the following precautions to protect the machine against frost. Perform the
following steps after every program run:
1 Pull the plug out of the socket.
2 Close the water supply and remove the inlet hose from the inlet valve.
3 Drain the water from the hose and valve into a vessel.
4 Reattach the inlet hose to the inlet valve.
5 Remove the filter from the bottom of the tub and use a sponge to soak up excess water.
Cleaning the spray arms
The spray arms can be easily removed for regular cleaning of the nozzles to avoid
clogging.
1 Grasp the center of the spray arm
and pull it up to remove it.
2 Wash under running water and
reinsert carefully. Make sure that
their rotation is not obstructed in
any way.
EN
43