SBM MTH 100 DI Technical Instructions page 12

HOUR :
Mo * n° 01  07 : 00 = Clr
modify (+/-) / yes ()
MINUTES :
Mo * n° 01  07 : 00 = Clr
modify (+/-) / yes ()
SETPOINT :
Mo * n° 01  07 : 00 = Tr
modify (+/-) / yes ()
NEW STEP :
Mo * n° 01  07 : 00 = Tr
next (+/-) / yes ()
Mo * n° 02  00 : 00 = Clr
modify (M) / exit ()
Mo * n° 05  17 : 15 = Tn
modify (+/-) / yes ()
NEXT DAY :
Mo * n° 01  07 : 00 = Tr
next (+/-) / yes ()

+ or -
To select the hour

 To validate and move on to minutes setting
 To select the minutes
or
+ -
To validate and move on to selection


of corresponding setpoint
For each possible step, select :
 To select the temperature setpoint
+ or -


To validate and move on to next step
After each setpoint validation,
!
the module automatically goes back
to step no. 01.

or
+ -
To select the next step
You will then move on to the


2
Validate and repeat as many times as

M
required to finish Monday's programming.


To validate the final step for Monday (no. 05)
After validating the 5th step, step no.01
will flash again

+
To move on to the next day (Tuesday)
}
..........
Move down the steps no.01 to 07

+
Tc : confort Temperature
Tr : reduced Temperature
Tn : night Temperature
Clr : Clear the programme step
(time + setpoint)
nd programming step for Monday
12