Page 1
User's Manual for LiteTouch Model LTouchC Note: Please read this Manual carefully before using the product! Do not attempt to disassemble the product. If the product does not work, please contact technical support or our dealer in your area.
Thank you for your LiteTouch purchase. This product was designed to provide a safe lifetime of usage for you and was developed to the highest safety standards possible. The product was also tested prior to delivery to ensure these safety standards were met.
Page 4
• Any power strips connected to the LiteTouch components (if the cleaning fluid or water flows into panel should be easy to operate. the product) and cause display failure. •...
4” Wall 4” Packing List Item Item • • 3m USB Cable A-B x 1 LiteTouch Panel x1 • • WIFI USB Dongle x 1 Remote Control x 1 • • 3m HDMI Cable x 1 User's Manual x 1 •...
Installation and Connection Ports The Bottom Interface The Side Interface Notice: Different models in the same series may have slightly different ports. The above pictures are subject to the actual product. 1. Power Port 2. HDMI Ports 3. HDMI-OUT Port; 4. LAN Port ;...
Installation and Connection Connection Diagram Schematic diagram for connecting the product to a PC. (Note: Disconnect the power plug before installing or removing the product!) Notice: The connection diagram in this Manual is only for reference when connecting a PC, which is subject to actual operations.
Page 8
Installation and Connection Schematic diagram for connecting the product another product. (Note: Disconnect the power plug before installing or removing product!) Connection ports on the product The HDMI-OUT interface outputs the HDMI signal from HDMI1, HDMl2, and HDMl3. The output of video signals is transferred to the next machine.
Installation and Connection Control Buttons on the Front Panel Notice: Different models may have slightly different appearances. The above pictures are subject to the actual product. Remote Control Install Batteries in the Remote Control: Remove the battery compartment cover and follow the polarity marks "+"...
Page 10
• Protect the remote control from violent vibrations. Also, never set or place the remote control in direct sunlight because the resulting heat may result in deformation of the remote control. • When the remote receiver on the main unit is subject to direct sunlight or strong light, it is possible that the remote control will not work properly.
Basic Operations Power On/Standby Insert the power plug into the power outlet. First turn on the On/Off button on the product, if available; then press on the remote control or control panel to turn on the product. In the absence of the On/Off button just press Source Selection Upon startup,...
Page 12
Press the "MENU" key on the remote control or on the front panel; the screen will display the main menu: 1. Press on the remote control or on the front panel to select an adjustment category menu. Adjustment category menus include: Picture, Sound Mode Adjustment, Channel,...
Sharpness Adjust the black-white gradation of pictures: increase the analog value to improve the sharpness; decrease the analog value to reduce the sharpness (0-100). PC Screen Adjustment Automatically correct the screen (valid only under VGA signal). Adjust the color depth of pictures: increase the analog value to increase the color Saturation depth;...
Android System Basic Operations Press to display the main interface of the built-in Android system (as shown in the figure). 1. Press to select an app; 2. Press "OK" to run the app; • Notice - Operations are complex in the Android system;...
Android System APK Installer: The APK Installer option helps user to manage apps. User can install setup files stored on the local disk or uninstall locally installed apps. How to install an app - After entering APK installation, select Install and press "OK".
Android System During playback, press "OK" to display the menu options shown above. Select the corresponding icon, press "OK " to execute the operation. User can press "Back " to exit playback, or press " on the remote control to perform shortcut operations. Settings Network Settings: Select Network Settings under...
Page 17
Android System Wireless Network Settings: 1. Select Network from the Android Settings menu. 2. Select Wi-Fi and then On/Off to turn the wireless network function on. 3. In a moment, the available Wi-Fi networks will be visible below this On/Off selection. 4.
Troubleshooting Symptom Possible Cause Solution Power plug may be loose, power The screen does not Check if the power cord is properly connected display anything; there connection failure no sound, and the indicator does not come Pictures shown on the Signal interference caused by automobile, Do not use the electric hair dryer near the product;...
Toxic and Hazardous Substance or Element Component (Hg) (PBB) (PBDE) (Cd) Display screen Housing PCBA* Power cord and cables Metal parts Packing materials* Remote control Speaker Accessories* This table has been prepared in accordance with SJ/T11364. PCBA includes the PCB and its electronic components;...