The Timer; Setting The Clock - Sony CFD-370 Operating Instructions Manual

The Timer

Setting the clock

Before you set the clock, insert four R6
(size AA) batteries and connect the AC
power cord (see pages 23 and 24.)
Before you set the clock, "0:00" (24-hour
system) or "AM 12:00" (12-hour system)
flashes.
Tip
The time display
system:
Models for Europe and
Korea:
24-hour system
Other models:
12-hour system or 24-
hour system
DISPLAY/ENTER
1
Press CLOCK/TIMER until "CLOCK" appears on
the display.
2
Press CLOCK/TIMER for about 2 seconds until
the hour digit flashes.
3
Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
4
Press DISPLAY/ENTER.
The clock starts from 00 seconds.
CLOCK/TIMER TUNING/TIME
SET +/–
/
EN
19
The Timer