Do you have a question about the Long Distance Controller and is the answer not in the manual?
Questions and answers
Summary of Contents for Schnick-Schnack-Systems Long Distance Controller
Page 1
LED Effects Technology for professionals. U s e r G u i d e L o n g D i s t a n c e C o n t r o l l e r This product is UL-certificated.
Page 3
Overview Connections Installation System Cabling Cabling examples Menu Order Addressing Addressing individual outputs Level Indicator Test Mode Technical Data Pin Assignment EU-Conformity Declaration...
LED-Tiles. The Long Distance Controller offers The Long Distance Controller is the only device of its kind six independent RGB outputs on a multicore system plug working with three separate, and separately operated, connection.
Connections On the back of the device you will find the following connection options: DMX IN Air inlet DO NOT COVER! DMX OUT Harting HAN B24 Air inlet DO NOT COVER! clean frequently. clean frequently. Main Connector 115-230V AC, 50-60 Hz DMX In- or Output Neutrik XLR5-Pin LED Output...
After approximately one second the Long Distance Controller is ready for use. If the Long Distance Controller has been taken from a cold environment into a warm interior after transportation, Keep the unit out of direct sunlight at all times.
Page 7
The overall line length of the LED-Strips can be 30m maximum. In general: the products of the series B and L, which are connected with the Long Distance Controller, each output 3A maximum. Cabling example Dimming of Series L with a Long Distance Controller O/P 1 No. 1 No.
Menu Order On the front of the device you will find the following connection options: QUIT SHIFT DOWN EDIT ENTER UP SHIFT+ ENTER used in conjunction with... to confirm certain actions, e. g. changeover EDIT to move the cursor backwards through the data fields moves upward through the mode list.
(using horizontally running beams) for the red, green and blue on the LED-Strips. Test Mode To switch the Long Distance Controller into Test Mode, press SCHNICK and hold SHIFT and press ENTER simultaneously. The display Test Mode SCHNACK will now appear as indicated in the figure (see right).
Technical Data Housing 19“, two height units Dimensions 483 x 88 x 407mm (WxHxD) Operating voltage 115-230V, 50-60Hz Power consumption 700VA Power Input Connector IEC plug, lockable PRedocol DMX 512 A-1990 USITT DMX IN Neutrik XLR5-Pin plug DMX OUT Neutrik XLR5-Pin plug Output Red 27V/6x900 mA Output Green...
Page 12
Schnick-Schnack-Systems GmbH Mathias-Brüggen-Straße 79 50829 Cologne Phone: 0221/99 20 19-0 Fax: 0221/16 85 09-73 info@schnickschnacksystems.com www.schnickschnacksystems.com Disclaimer 2013: All technical data as well as weights and dimensions have been carefully compiled –errors excepted. Any possible deviation and discrepancy in colours are due to technicalities during printing. We reserve the right to make changes for future betterment.
Need help?
Do you have a question about the Long Distance Controller and is the answer not in the manual?
Questions and answers