Page 1
Original Instruction Manual 7417070 Professional Engraver 7417070-AUS Australian Plug Version 7418046-EP European Plug Version 7417087 110V Version Version 3.4 June 2014 To register this product please visit www.recordpower.info It is important to register your product as soon as possible in order to receive efficient after sales support and be entitled to the full 5 year guarantee.
1. Explanation of Symbols THE SYMBOLS AND THEIR MEANINGS SHOWN BELOW MAY BE USED THROUGHOUT THIS MANUAL. PLEASE ENSURE THAT YOU TAKE THE APPROPRIATE ACTION WHEREVER THE WARNINGS ARE USED. Mandatory Instructions Read and fully understand the instruction manual before attempting to use the machine. Indicates an instruction that requires particular attention Wear protective eyewear Use respiratory protective equipment...
2. General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. 4) Power tool use and care Failure to follow the warnings and instructions may result in a) Do not force the power tool. Use the correct power tool for your electric shock, fire and/or serious injury.
Guarantee should be made directly to Record Power or its Authorised Distributor Record Power guarantees that for a period of 5 years from the date (for details of the Authorised Distributor in your country please see of purchase the components of qualifying Products (see clauses 1.2.1 your Product manual or check www.recordpower.info for details).
5. Specifications Strokes per second: 100 Voltage: 7417070 230V 50Hz 7418046 - EP 230V 50Hz 7417070 - AUS 240V 50Hz 7417087 110V 50Hz 6. Noise and Vibration Information (Measured in Accordance With En 60745): Typical A-weighted sound power level LpA : 72.7 dB(A)
If any movement is detected, tighten the knurled sleeve slightly. Your Record Power engraver has been carefully designed to enable beginners to obtain good results. As you become more experienced in the Fig 7.1 use of the engraver you will be able to carry out more difficult work.
7.3 Metal Engraving 7.7 Relief Wood Carving This type of work represents one of the most interesting and widely Commence by tracing your design into the wood with the A5 Point. Then used applications for the engraver in the hands of both the amateur and insert the A21 V-shaped chisel and cut away the wood immediately outside professional alike.
8. Electrical Connection & Wiring Diagram fitted with a fuse conforming to BS1362 appropriate to the rating of the machine. If replacing the original fuse, always fit a fuse of equivalent rating to the original. Never fit a fuse of a higher rating than the original. Never It is recommended that the engraver is always connected to modify the fuse or fuse holder to accept fuses of a different type or size.
9. Additional Tips Available for the Record Power Engraver A6 & A7 Ball Points 7400065 Set of 4 (A6 x 2 and A7 x 2), for metal embossing, A6 Ball Point A7 Ball Point hammering and leather work. A18 - A22 Carving Chisels 7400096 Set of 5, for carving timber, plastic and linoleum.
Cleaning United Kingdom & Eire The body of the engraver should be kept clean and free of oil or grease. Record Power Ltd Clean regularly with a soft damp cloth and mild detergent. Take care not to Centenary House, wet the engraver and ensure that is fully dry by wiping with a dry cloth. Do...
EU Declaration of Conformity Cert No: EU / 7417070 / 1 Record Power Limited, Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire, S43 4XA declares that the machinery described:- Type: Engraver Model No: 7417070, 7417087 & 7418046-EP Serial No .................
Page 16
Woodworking Machinery & Accessories United Kingdom Eire Australia New Zealand Record Power Ltd Record Power Ltd Tools 4 Industry Tools 4 Industry Centenary House, Centenary House, Po Box 3844 Po Box 276079 11 Midland Way, Barlborough Links, 11 Midland Way, Barlborough Links,...