Antenna Installation - R2TECK NEXG1 User Manual

无锡人人行拍网络科技有限公司
Ø Run the APP "NEXG1".
Ø the MOBILE light on the receiver turn-on.
Currently only allow working one mobile, if want to change the mobile, please follow below
process:
a) Disconnect the mobile with receiver Wi-Fi network.
b) Wait receiver MOBILE light turn off.
c) Repeat the above 3 steps.
Note:
iOS client: If you need to download on the iPad, please choose " iPhone Only". In addition, it is recommended
to use models above iPhone7 and systems above iOS 9.0.
Android client: Android5.0 and above, CPU: 8-core 1.8GHz and above. Memory: 3G and above, try to choose
the mobile phone released after 2017.
Fix the receiver to the ground in use. Cannot use this device as portable ones.

1.2 Antenna installation

1.2.1 Transmitter
l In order to obtain the best transmission effect, it is recommended to install the transmitter
antenna as shown in Fig.1.2.1.1
l Transmitter antenna shall be installed one in front and the other in rear to ensure 360-degree
omnidirectional coverage of the transmitting signal.
l Transmitter antenna need to be fixed to avoid radiation angle changes caused by antenna
shaking.
Note: The following is not recommended for antenna installation.
Antenna
Fig.1.2.1.1 Transmitter antenna recommended installation
2
Antenna