1. Manuals
  2. Brands
  3. SEABELL Manuals
  4. Weather Station
  5. SH-018
  6. Instruction manual

SEABELL SH-018 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WIRELESS WEATHER STATION
Instruction manual

1.Description of parts

Fig. 1: Receiver
A 1
A 2
A 3
A 4
A 5
Fig. 2
B1
B2
B3
B4
Fig. 3: Transmitter
WEATHER STATION
C 1
C 2
-1-
Model:SH-018
A 15
A 14
A 13
A 12
A 11
A10
A 9
A 8
A 7
A 6
C 3
C 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SH-018 and is the answer not in the manual?

Questions and answers

Summary of Contents for SEABELL SH-018

  • Page 1 WIRELESS WEATHER STATION Instruction manual Model:SH-018 1.Description of parts A 15 A 14 Fig. 1: Receiver A 13 A 12 A 11 WEATHER STATION Fig. 2 Fig. 3: Transmitter...

  • Page 2: Scope Of Delivery

    Fig. 1 Weather forecast symbols Channel number RCC symbol / week A10: Outdoor low power symbol Outdoor temperature Time/alarm A11: Indoor humidity maximum and minimum Indoor humidity trend Month/Date A12: Air pressure Indoor low power symbol A13: Outdoor temperature trend A14: Indoor temperature and humidity display A15:...

  • Page 3: Getting Started

    Caution! Risk of injury: • Keep these instruments and the batteries out of the reach of children. • Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion! • Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by leaking.
  • Page 4 • When the time code is received successfully after 2-12 minutes, the radio-controlled time and the DCF symbol are displayed steadily in the display. The other buttons are activated permanently. • You can start the initialization manually. • Press and hold the -/RCC button for 3 seconds. The DCF symbol will be flashing. •...

  • Page 5: Weather Forecast Symbols

    7.1.1 Setting of the time zone • In the setting mode you can make the time zone correction (-12/+12). • The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from the German time (e.g. +1=one hour later). 7.1.2 Setting of the 12 and 24 hours display •...
  • Page 6 Note: Please note that the forecast symbol will become more defined in the course of operation. The forecast symbol is active right from the start, however, the reliability of the forecasts increases with the amount of data collected. The sensor must adapt initially to the reference level at the site. 9.

  • Page 7: Care And Maintenance

    12. Care and maintenance • Clean the devices with a soft damp cloth. Do not use solvents or scouring agents. • Remove the batteries and pull out the power adapter of the socket, if you do not use the products for a long period of time.

Table of Contents