Do you have a question about the ViTAM-1 Series and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Aplex ViTAM-1 Series
Page 1
Stainless Steel Display User Manual Release Date Revision Nov. 2018 V1.4 ®2018 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 URL: http://www.aplextec.com/zh/home.php...
Revision History Reversion Date Description 2016/12/14 For Preliminary Release 2016/12/22 Update power consumption and net weight 2017/01/10 Official Version 2017/03/07 Revised VESA mounting size 2017/07/28 Add I/O drawing and definition 2018/02/14 LCD description 2018/11/01 Revise Operatiing temperature+LCD size ViTAM-1XX Series User Manual...
This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or in any related materials.
Chapter 1 Getting Started 1.1 Features 10.1”/12.1”/15”/15.6”/17”/19”/21.5”/23.8” New Gen. stainless steel display True flat front bezel design and grade 304 stainless steel enclosure (grade 316 for option) IP66/IP69K rated with M12 connectors Support resistive touch, projected capacitive touch, and glass ...
Page 7
TMDS Data2 Shield TMDS Data2- TMDS Data1+ TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ TMDS Clock Shield TMDS Clock- Reserved (N.C. on device) SCL(I C serial clock for DDC) SDA(I C serial data for DDC) DDC/CEC Ground +5 V Power Hot Plug Detect...
Page 8
Power 1 x DC power input (9~36V) by M12 connector Pin Define Others 1 x Touch on/off button on the side OSD Control Membrane OSD on the rear side Speaker 1 x 2W IP65 speaker (optional) Touch Screen Type Resistive touch window (for R model) (not available for ViTAM-124) Projected capacitive touch screen (for P model) Interface...
Page 9
Power Consumption and Mechanical Specifications ViTAM-110 ViTAM-112 ViTAM-115 ViTAM-116 P/R/G/(H) P/R/G/(H) P/R/G/(H) P/R/G/(H) Power Consumption Power Consumption MAX: 6.2W (110R) MAX: 8.9W (112R) MAX: TBD (115R) MAX: TBD (116R) MAX: 11W (110P) MAX: TBD (112P) MAX: 9.3W (115P) MAX: 12.5W (116P) Mechanical Mounting VESA mount 75 x 75, Yoke mount...
1.4 Brief Description of ViTAM-1XX Series ViTAM-1XX series with TB-6029 AD board is an IP66/IP69K rated with M12 connectors new generation stainless steel display, which comes with 10.1”, 12.1”, 15”, 15.6”, 17”, 19”, 21.5”, and 23.8” color TFT LCD. ViTAM-1XX series are wide range DC 9~36V power input and true flat front bezel designed with grade 304 stainless steel enclosure (grade 316 is for option).
Figure 1.10: Rear View of ViTAM-110P/R/G/(H) Figure 1.11: Rear View of ViTAM-112P/R/G/(H) Figure 1.12: Rear View of ViTAM-115P/R/G/(H) ViTAM-1XX Series User Manual...
Figure 1.13: Rear View of ViTAM-116P/R/G/(H) Figure 1.14: Rear View of ViTAM-117P/R/G/(H) Figure 1.15: Rear View of ViTAM-119P/G/(H) ViTAM-1XX Series User Manual...
Chapter 2 2.1 AD Board OSD Functions Auto Adjust Up/Left Down/Right Power Menu/Entry Power Indicator Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item.
When the Burn-in Mode is Unable to Eradicate… If the “RGB” is still on the top left corner of the screen, press to enter “Miscellaneous” and choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power and repeat the above steps. If the “RGB”...
2.3 Main Menu In the PICTURE, there are the following items: Backlight Brightnaess Contrast Sharpness Exit In the DISPLAY, there are the following items: AutoAdjustment H Position V Position Pixel Clock ...
Page 23
In the COLOR, there are the following items: Gamma Color Temp Color Effect Exit In the ADVANCE, there are the following items: Aspect Ratio Exit ViTAM-1XX Series User Manual...
Page 24
In the INPUT, there are the following items: Auto Select VGA DP DVI Exit In the AUDIO, there are the following items: Volume Mute Exit ViTAM-1XX Series User Manual...
Page 25
In the OTHER, there are the following items: Reset Menu Time OSD H Position OSD V Position Language Transparency Rotate Exit Exit part. ViTAM-1XX Series User Manual...
Chapter 3 Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. 3.1 Windows 7 Universal Driver Installation for PenMount 6000 Series Before installing the Windows 7 driver software, you must have the Windows 7 system installed and running on your computer.
Page 27
Step 2. Read the license agreement. Click I Agree to agree the license agreement. Step 3. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. ViTAM-1XX Series User Manual...
Page 28
Step 4. Click Yes to continue. Step 5. Click Finish to complete installation. ViTAM-1XX Series User Manual...
Page 29
3.1.2 Installing Software (Projected Capacitive) Step 1. Click Next to continue. Step 2. Select I accept the terms of the license agreement. Click Next. ViTAM-1XX Series User Manual...
Page 30
Step.3. Click Next to continue. Step 4. Click Install RS232 interface driver. ViTAM-1XX Series User Manual...
Page 31
Step 5. Select None. Click Next. Step 6. Click OK. Step 7. Click Support Muti-Monitor System. Click Next. ViTAM-1XX Series User Manual...
Page 32
Step 8. Go to C:\Program Files\eGalaxTouch. Click Next. Step 9. Click Next. ViTAM-1XX Series User Manual...
Page 33
Step 10. Click Create a eGalaxTouch Utility shortcut on desktop. Click Next. Step 11. Wait for installation. Step 12. Click Yes to do 4 point calibration. ViTAM-1XX Series User Manual...
3.2 Software Functions 3.2.1 Software Functions(Resistive Touch) Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1. After installation, click the PenMount Monitor icon “PM” in the menu bar. 2.
Page 35
Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence. After the fifth red point calibration is complete. To skip, press ‘ESC’. Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch panel linearity of aged touch screens.
Page 36
Step 2.Click “Standard Calibration” to start calibration procedure NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: ViTAM-1XX Series User Manual...
Page 37
Step 3. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy. Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration.
Page 38
Setting Touch Mode This mode enables and disables the mouse’s ability to drag on-screen icons – useful for configuring POS terminals. Mouse Emulation – Select this mode and the mouse functions as normal and allows dragging of icons. Click on Touch – Select this mode and mouse only provides a click function, and dragging is disables.
Page 39
Edge Compensation You can use Edge Compensation to calibrate more subtly. ViTAM-1XX Series User Manual...
Page 40
About This panel displays information about the PenMount controller and driver version. Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows 7 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
Page 41
to assign touch controllers to displays. 2. When the mapping screen message appears, click OK. 3. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens. 4. Touching all screens completes the mapping and the desktop reappears on the monitors.
Page 42
6. “Touch this screen to start its calibration” appears on one of the screens. Touch the screen. 7. “Touch the red square” messages appear. Touch the red squares in sequence. 8. Continue calibration for each monitor by clicking Standard Calibration and touching the red squares.
Page 43
PenMount Monitor has the following function Control Panel Open Control Panel Windows Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions.
Page 44
3.2.2 Software Functions(Projected Capacitive) General In this window, you can see there is USB Controller. Click OK to continue. Monitor Mapping to adjust touch panel to search for device ViTAM-1XX Series User Manual...
Page 45
Setting Beep Beep On Touch Beep On Release Beep From System Beep Beep From Sound Card Linearization Style 9 points 25 points Double Click Time Shorter Longer Double Click Area Smaller Bigger Normal mode Simulate the mouse mode ViTAM-1XX Series User Manual...
Page 46
Option Function Enable Constant Touch Enable Auto Right Click Enable Touch Enable Cursor Stabilization Constant Touch Area Auto Right Click Time ViTAM-1XX Series User Manual...
Page 47
Tools Click OK to continue the settings. 4 Points Calibration Do 4 points alignment to match display. Clear and Calibrate Clear linearization parameter and do 4 points alignment. Linearization Do 9 points linearization for better touchscreen linearity. Draw Test Do draw test to verify the touch accuracy. ViTAM-1XX Series User Manual...
Page 48
Display In this window, it shows the mode of display. Enable Multiple Monitors. Map to main display if system has only one display monitor Full Screen Lower Screen Left Screen Upper Screen Right Screen ViTAM-1XX Series User Manual...
Page 49
Other Other mode of display. Quarter1~4 and Customized area. Active Area Drag active area to enable Active Area Function. ViTAM-1XX Series User Manual...
Page 50
Hardware Saturn Hardware Configuration ViTAM-1XX Series User Manual...
Page 51
About To display information about eGalaxTouch and its version. ViTAM-1XX Series User Manual...
Appendix B: Yoke Mounting and VESA Mounting The ViTAM-1XX Series model can be Yoke mounted and VESA mounted as shown in Picture below. Figure B: Yoke mounting of ViTAM-1XX Series Figure C: VESA mounting of ViTAM-1XX Series ViTAM-1XX Series User Manual...
Need help?
Do you have a question about the ViTAM-1 Series and is the answer not in the manual?
Questions and answers