Drawing of the radio 1 Antenna 2 LCD-Panel 3 UP Button & Volume Control 4 DOWN Button & Volume Control 5 Ein-Aus und Shift-Taste (Auswahltaste) 6 Function Button) 7 Built-in microphone (Active) 8 Flexboom microphone 9 Charger / PTT-socket 10 Push-To-Talk (PTT) 11 Active ON/OFF –...
Introduction Proradio keeps the advantages of a heavy duty, rigid headset, to ensure the safety of hearing in noisy working environments, combined with the functions of an modern PMR-transceiver, that can be used without licence in nearly all European countries (see country list attached). Active function Active hearing-protection with electronically Level-Limiting at 83 dB.
ICONS on LCD RSSI (Receiving Signal Strength Indicator) or TX Bar Icon Indicates the receiving signal strength during transmission and it can be indicated the number of bar according to the strength of receiving signal. Auto Channel Scan Indicator Appears in the normal scan mode or when the normal scan mode is activated Priority Scan Indicator Appears in priority scan mode or when the priority scan mode is activated.
Small Segment Display Displays the FM frequency at the FM mode. Displays the SUBMENU of each MENU in the function mode. Key Function Power ON/OFF & Shift Button Press this button briefly to turn the unit on. A short confirming melody will play. A momentary press of this button is not effected to any function in the Function edit mode and stand-by mode except in the specific mode.
Key Lock Press the Function Button for longer than 1.5 seconds to activate the KEY LOCK in the standby mode NOTE :Please note all buttons will be disabled except the PTT Button will remain fully operational. Setting and Operation Sub Option Selection Mode This mode allows you to enter the sub option selection mode.-Press the Function Button until the word “Sub”...
446.06875 446.08125 446.09375 Basic Channel Selection In order to communicate with other PMR units, both you and the receiving party must be on the same channel. Proradio has 8 channels (1-8) as indicated by the large digits in the LCD Display Panel. Before, trying to transmit on the selected channel, you should press the PTT Button to check the activity on that channel.If someone is already on the selected channel, you should try another channel that is clear.To change the basic channel, In the standby mode, press the Up...
118,8 Hz 233,6 Hz 123,0 Hz 241,8 Hz 127,3 Hz 250,3 Hz VOX & VOX Recovery Time Selection Mode 1) VOX Selection Mode The Voice Activated Transmission (VOX) function allows your voice to activate transmission automatically when the ProRadio is used within not too noisy environments. It also allows Handsfree use , if You should not have the hands free for presssing PTT knob.
Active Function Active hearing-protection with electronically Level-Limiting at 83 dB. Suitable for impulse-noise. With the black rotary-switch on the side of the shell you turn on the active mode function. Now you can hear the surrounding-noises and speak again stereophonically. At abrupt rising noise (hammer-blow, shot etc.) the electronic will limit the level which you hear in the headset.
FM Radio Mode FM Only: You can receive the FM Radio only FM plus: You can receive the FRS signal even while you listen to the FM Radio. When the FM only or FM plus is selected on the FM selection mode, FM icon( )appears on LCD Panel.
Need help?
Do you have a question about the PRORADIO FM and is the answer not in the manual?
Questions and answers